Panasonic NV-DS65 ª Audio Dubbing, ª Recording the Contents of Other Equipment, ª Photo Title

≥Even if Playback Digital Zoom Functions are being used, images that are output from the DV Terminal (l7) or Digital Still Picture Terminal (l37) are not enlarged.

≥As you enlarge an image, the quality of image suffers.

ªAudio Dubbing

≥The blank section of a tape cannot be dubbed. ≥Sounds sent through the DV Terminal cannot be

dubbed.

≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

≥If you set the tape counter back to 0 at the position where you want to stop Audio Dubbing so as to make it possible to use the Memory Stop Function (l57), Audio Dubbing is terminated automatically when the tape reaches this position.

≥In the case of importing data recorded with Audio Dubbing to a PC using the PC’s software programme, only the original sound (ST1) may be imported, depending on the software programme.

ªRecording the Contents of Other

Equipment

Analog-Digital Conversion

≥When the Movie Camera is connected with other digital video equipment through its DV Terminal, images recorded in analog form from other external equipment can be output to the digital video equipment through the DV Terminal.

ªUsing the DV Cable for Recording

(Digital Dubbing)

≥Regardless of the setting, digital dubbing is carried out automatically in the same audio recording mode as that of the Cassette on the playback-side.

≥The images on the monitor of the recording side may be disturbed, but it does not affect the recorded images.

≥Even if Playback Digital Effects or Playback Digital Zoom Function have been used, these effects are not output from the DV Terminal.

≥Even if you use device equipped with DV Terminals (such as IEEE1394), you may not be able to perform Digital Dubbing in some cases.

≥Do not connect both an S-Video Cable or AV Cable and a DV Cable.

ªRecording on a Card

≥You cannot record still images from the tape to the Card when a USB Cables is connected.

≥The sound cannot be recorded. ≥The Shutter Effect cannot be used.

≥Pictures with wide-screen format signals cannot be copied.

≥Even if Playbak Digital Effects (MIRROR, MOSAIC, SEPIA, B/W) have been used, these effects do not affect the recording.

≥Multi-Picture cannot be recorded.

ªPlaying Back a Card

≥If a blank (nothing recorded) Card is played, the screen becomes white and the [NO PICTURE] Indication appears.

≥If you attempt to play back a still picture recorded in a different format or a picture whose image data is defective, the [INCOMPATIBLE IMAGE] Indication could appear as warning.

≥This Movie Camera can also play back the Mega-Pixel still pictures recorded with the other equipment. However it takes longer than usual

time.

≥When the size of the picture played back is over [1280k960], the picture played back in small size on the LCD Monitor.

ªPhoto Title

≥The Photo Title Function and Digital Function cannot be used simultaneously.

≥After recording, the Photo TItle setting is cleared automatically.

≥The Photo Title Function cannot be used when a DV Cable is connected.

ªFormatting a Card

If a Card becomes unreadable by the Movie Camera, formatting it may make it reusable. Formatting erases all the data recorded on a Card.

≥When the formatting is completed, the [NO PICTURE] Indication appears.

≥It may not be possible to use the Card which was formatted using this Movie Camera on another unit. In this case, format the Card on the unit which will be using the Card. Take steps to ensure that valuable pictures are stored on the personal computer, etc. as well before proceeding.

ªDPOF

≥Perform the DPOF Settings with your own Movie Camera in use.

≥Verifying the DPOF Settings may take a little time. Wait until the [ACCESS] Lamp goes out.

ªUsing a Card in a Personal

Computer

≥To erase pictures that you recorded on the Card by using the Movie Camera, be sure to erase them on the Movie Camera, not on the computer.

49