3

2

1 3

2

1

4 PLEASE WAIT

CARD Mode

Using a Card

A Card can be used to record still pictures. Use genuine card only.

When setting an M-CARD Mode, the DV Output will not function.

ªInserting a Card

Before inserting a Card, be sure to turn off the Movie Camera.

1Open the Card Slot Cover.

2Insert the Card in the direction as shown in the illustration 1.

3Close the Card Slot Cover securely.

Removing the Card

Open the Card Slot Cover and press the centre of the Card and then pull it straight out.

After removing the Card, close the Card Slot Cover.

The SD Memory Card has a write protection switch on it. 2 If the switch is moved to the [LOCK] side, you cannot write to or format the Card. If it is moved back, you can.

ª[ACCESS] Lamp 3

ACCESS Lamp is available only when the Card Slot Cover is opened.

While the Movie Camera is making an access to the Card (reading, recording, playback, erasing, moving of images), the [ACCESS] Lamp lights up and the [PLEASE WAIT] Indication 4 appears.

While the [ACCESS] Lamp is on, never attempt to pull out the Card or to turn off the Movie Camera. Such actions will damage the Card, cause loss of recorded data and cause the Movie Camera to malfunction.

38

Page 38
Image 38
Panasonic NV-DS60, NV-DS65 operating instructions Using a Card, Inserting a Card, Access Lamp