12:30:45
15.10.2003
12:30:45
15.10.2003
2 1
1
1
OPEN 
1
2 2 180x 3 90x
LCD/EVF SETUP
LCD BRIGHTNESS
LCD COLOUR
EVF BRIGHTNESS
PRESS MENU TO RETURN
Using the Viewfinder/LCD Monitor
ªUsing the Viewfinder
Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read.
1Pull out the Viewfinder and tilt it up.
2Adjust by sliding the Eyepiece Corrector Knob 1.
≥Do not pull hard on the Eyecup.
ªUsing the LCD Monitor
With the LCD Monitor open, you can also record the picture while watching it.
1Put the finger on the [OPEN 4] Knob and pull the LCD Monitor out about 90o in the direction of the arrow.
≥The Viewfinder goes off.
2Adjust the LCD Monitor angle according to the desired recording angle.
≥The LCD Monitor can rotate a maximum of 180o 2 from the vertical position to the upward direction and a maximum of 90o 3 to the downward direction. Forcefully
rotating the LCD Monitor beyond these ranges will damage the Movie Camera.
Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
ªAdjusting Brightness and Colour Level
When [LCD/EVF SETUP] on the [CAMERA FUNCTIONS] or [VCR FUNCTIONS]
LCD Brightness [LCD BRIGHTNESS]
It adjusts the brightness of the image on the LCD screen.
LCD Colour Level [LCD COLOUR]
It adjusts the colour saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
It adjusts the brightness of the image in the Viewfinder.
To Adjust
Press the [PUSH] Dial and select the item to be adjusted, and then turn the [PUSH] Dial to raise or lower the number of vertical bars in the Bar Indication.
≥A larger number of vertical bars indicates stronger brightness or colour saturation.
≥For other notes concerning this item, see page 53.
13
