Panasonic NV-DS60 To Pause the Recording, To Check the Recording, To Finish the Recording

AUTO 1

2

POWER

M-CARD

CAMERA

1, 3 OFF

VCR

2 MANUALAUTO/ 5

REW/

34

RECPAUSE

RECORD PAUSE

CAMERA Mode

Recording

When the [AUTO] Indication 1 is displayed on the screen, the Movie Camera automatically adjust the focus and white balance. In some cases, they cannot be adjusted automatically and need to be adjusted manually. (l25, 27)

1Set the [VCR/OFF/CAMERA/M-CARD] Switch to [CAMERA].

≥The [POWER] Lamp lights up. 2

2Press the [AUTO/MANUAL] Button to display the [AUTO] Indication.

3Press the Recording Start/Stop Button.

≥Recording starts.

≥After the [RECORD] is displayed, it changes to [REC]. 3

ªTo Pause the Recording

Press the Recording Start/Stop Button again.

The [PAUSE] Indication is displayed. 4

≥If the Recording Pause Mode continues for more than 6 minutes, the power is turned off automatically for tape protection and power conservation. To resume recording from this condition, turn on the power again.

ªTo Check the Recording

By pressing the [S] Button 5 briefly in the Recording Pause Mode, you can play back the last few seconds of the recorded scene.

≥The [CHK] Indication is displayed. After checking, the Movie Camera resumes the Recording Pause Mode.

ªTo Finish the Recording

Set the [VCR/OFF/CAMERA/M-CARD] Switch to [OFF].

18