PROGRAMMING THE REMOTE
c will flash green to confirm each button press as you enter commands.
NOTE: While entering commands for Power On/Off of any device during a macro sequence, press the Mute Button 
41 . DO NOT press the actual Power button.
3.When all the steps have been entered, press the Sleep Button j to enter the commands. The red light under the Input Selectors ef will blink and then turn off.
Example: To program the Macro 1 button so that it turns on the AVR 135, TV and a cable box, follow these steps:
•Press the Macro 1 Button 30 and Mute Button 41 at the same time and then release them.
•Note that the Program Indicator cwill flash amber.
•Press the AVR Selector f.
•Press the Mute Button 
41 to store the AVR 135’s Power On command.
•Press the VID 3 Input Selector Button eto indicate the next command is for “TV Power On.”
•Press the Mute Button 
41 to store the TV Power On Command.
•Press the VID 2 Input Selector Button eto indicate the next command is for “Cable Power On.”
•Press the Mute Button 
41 to store the Cable Power On command.
•Press the Sleep/Channel Up Button jto complete the process and store the macro sequence.
After following these steps, each time you press the Macro 1 Button 30 , the remote will send the Power On/Off command.
Erasing Macro Commands
To remove the commands that have been pro- grammed into one of the Macro buttons, follow these steps:
1.Press the Mute Button 
41 and the Macro Button 30 that contains the commands you wish to erase.
2.The Program Indicator c will flash amber, and the LED under the AVR Selector f will turn red.
3.Within ten seconds, press the Surround Mode Selector/Channel Down Button k.
4.The red LED under the AVR Selector f will go out, and the Program Indicator c will turn green and flash three times before it goes out.
5.When the Program Indicator c goes out, the Macro has been erased.
135
Figure 11
Programmed Device Functions
Once the AVR 135’s remote has been programmed for the codes of other devices, press the appropriate Input Selector eto change the remote from controlling the AVR 135 to controlling the additional product. When you press any one of the selectors, it will briefly flash in red to indicate that you have changed the device being controlled.
When operating a device other than the AVR 135, the controls may not correspond exactly to the function printed on the remote or button. Some commands, such as the volume control, are the same as they are with the AVR 135. Other buttons will change their function so that they correspond to a secondary label on the remote. For example, the Sleep and Surround mode selector buttons also function as the Channel Up and Channel Down buttons when operating most TV sets, VCRs or cable boxes. The Channel Up/Down indication is printed directly on the remote. For many standard CD players, cassette decks, VCRs and DVD functions, the standard function icons are printed on top of the buttons.
For some products, however, the function of a particu- lar button does not follow the command printed on the remote. In order to see which function a button controls, consult the Function List tables on pages 33 and 34. To use those tables, first check the type of device being controlled (e.g., TV, VCR). Next, look at the remote control diagram in Figure 11. Note that each button has a number on it.
To find out what function a particular button has for a specific device, find the button number on the Function List and then look in the column for the device you are controlling. For example, button number 44
is the Direct button for the AVR 135, but it is the “Favorite” button for many cable television boxes and satellite receivers. Button number 30 is the Delay button for the AVR 135, but the Open/Close button for CD players.
NOTE: The numbers used to describe the button functions in Figure 11 for the purposes of describing how a button operates are a different set of numbers than those used in the rest of this manual to describe the button functions for the AVR 135.
Notes on Using the AVR 135 Remote With Other Devices.
•Manufacturers may use different code sets for the same product category. For that reason, it is impor- tant that you check to see whether the code set you have entered operates as many controls as possible. If it appears that only a few functions operate, check to see whether another code set will work with more buttons.
PROGRAMMING THE REMOTE 31