Harman-Kardon Comprehensive Overview of the Harman Kardon AVR 135 Stereo Receiver

Page 46

AVR 135 TECHNICAL SPECIFICATIONS

Audio Section

Stereo Mode

Continuous Average Power (FTC)

50 Watts per channel, 20Hz–20kHz,

@ <0.07% THD, both channels driven into 8 ohms

Six-Channel Surround Modes

Power per Individual Channel

Front L&R channels:

40 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

40 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side, Back) channels:

40 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Pro Logic I/II

40dB

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz – 130kHz

High Instantaneous

 

Current Capability (HCC)

±25 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

 

Frequency Range

520–1720kHz

 

Signal-to-Noise Ratio

45dB

 

Usable Sensitivity

Loop 500µV

 

Distortion

1kHz, 50% Mod 0.8%

 

Selectivity

±10kHz, 30dB

 

Video Section

 

 

Television Format

NTSC

 

Input Level/Impedance

1Vp-p/75 ohms

 

Output Level/Impedance

1Vp-p/75 ohms

 

Video Frequency Response

 

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

 

Video Frequency Response

 

 

(Component Video)

10Hz–50MHz (–3dB)

 

General

 

 

Power Requirement

AC 120V/60Hz

 

Power Consumption

65W idle, 540W maximum

 

 

(6 channels driven)

 

Dimensions

(Product)

(Shipping)

Width

17.3 inches (440mm)

21.5 inches (545mm)

Height

6.6 inches (168mm)

9.9 inches (251mm)

Depth

15 inches (382mm)

17.9 inches (455mm)

 

(Product)

(Shipping)

Weight

24.4 lb (11.1kg)

29.3 lb (13.3kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon and Power for the Digital Revolution are registered trademarks of Harman International Industries, Incorporated.

*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic” and the Double-D symbol are trademarks of Dolby Laboratories.

DTS, DTS Surround, DTS-ES and DTS Neo:6 are registered trademarks of Digital Theater Systems, Inc.

VMAx is a registered trademark of Harman International Industries, Incorporated, and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Harman International Industries, Incorporated. Cirrus is a registered trademark of Cirrus Logic, Inc.

46 TECHNICAL SPECIFICATIONS

Image 46
Contents AVR AUDIO/VIDEO ReceiverTable of Contents AVR 135 AUDIO/VIDEO ReceiverModèle pour les Canadien Description and FeaturesIntroduction Six channels of high-current amplificationSafety Information Important Safety InformationFRONT-PANEL Controls # %Auto ST Tuned REAR-PANEL Connections REAR-PANEL Connections Remote Control Functions Channel/8-Channel Direct Input MuteAVR is still turned on To functionAVR For more information on programming the remote Audio Equipment Connections Installation and ConnectionsSystem Installation To the same terminal on both the receiver and the speakerAC Power Connections If another device with component video outputsSystem Setup System ConfigurationSpeaker Selection and Placement Speaker PlacementSetting the System Configuration Memory Selectors egon the remote. When the unitUsing the On-Screen Display AVR Selector for any of the InputSurround Setup Input SetupSet Button p to enter the new digital input assignment Speaker Setup System Configuration Delay Settings Output Level Adjustment Important NotesUsing the Semi-OSD System Additional Input AdjustmentsOperation Volume ControlSurround Mode Selection Basic OperationDTS Digital Audio PlaybackDolby Digital Selecting a Digital SourceSurround Mode Chart Mode FeaturesDigital Bitstream Indications Speaker/Channel IndicatorsPCM Playback Indications PCM Audio Playback When a Dolby Digital or DTS source is playingTuner Operation Station SelectionMemory Backup Output Level Trim AdjustmentRecording Advanced Features D F a D E T I M EAt the Advanced Select menu Figure Programming Device Codes Programming the RemoteMacro Programming Press the Mute Button 41 to store the TV Power On Command Programmed Device FunctionsChannel Control Punch-Through Volume Punch-ThroughResetting the Remote Memory Transport Control Punch-ThroughFunction List FAV OSDSetup Code Table TV Manufacturer/BrandLogik Teknika Setup Code Table VCR Sansui SaloraSamsung SanyoSetup Code Table CD Setup Code Table DVD Setup Code Table SAT Setup Code Table Tape Setup Code Table CBLSignature RembrantSeam SprucerSymptom Cause Solution Troubleshooting GuideProcessor Reset Amplifier is in protection modeAVR 135 Technical Specifications NtscIndex