SYSTEM CONFIGURATION
¶, as doing so may damage your speakers, the AVR 135 or both. When
When you have completed your selection for the back surround channels, press the ¤ Button non the remote to move the cursor to SUBWOOFER.
Press the ‹/› Buttons oon the remote to select the option that best describes your system.
The choices available for the subwoofer position will depend on the settings for the other speakers, particu- larly the front left/right positions.
If the front left/right speakers are set to SMALL, the subwoofer will automatically be set to SUB, which is the “on” position.
If the front left/right speakers are set to LARGE, three options are available:
•If no subwoofer is connected to the AVR 135, press the ‹/› Buttons o on the remote so that NONE appears in the
When this option is selected, all bass information will be routed to the front left/right “main” speakers.
•If a subwoofer is connected and you wish to have the front left/right “main” speakers reproduce bass frequencies at all times, and have the subwoofer operate only when the AVR 135 is being used with a digital source that contains a dedicated
•If a subwoofer is connected and you wish to use it for bass reproduction in conjunction with the main front left/right speakers, regardless of the type of program source or Surround mode, press the ‹/› Buttons o on the remote so that SUB LFE+L/R appears in the
When all initial speaker “size” settings have been made, you now have the option to take advantage of the AVR 135’s Triple Crossover system, which allows individual crossover settings to be made for each speaker grouping. The
the design and driver complement of your speakers, it is usually defined as the lowest possible frequency the speaker is capable of reproducing. Before making any changes to the settings for the crossover point, we suggest that you find the crossover point for the speakers in each of the three groupings, front left/right, center and surrounds, by looking at the specifications page of each speakers’ owner’s manual, or by contacting your dealer or the manufacturer’s customer service department or Web site. You will need this figure to accurately configure the next group of settings.
The factory default setting for all speaker positions is 100Hz. If that setting is acceptable for all channels, then no adjustments are needed and you may skip this section. However, should you wish to change one of the settings, please proceed by pressing the ⁄ Button n so that the cursor moves back up to the top of the list of setting options. Press the ⁄/¤ Buttons n so that
* S P E A K E R S E T U P *
M O D E | : X - O V E R |
L E F T / R I G H T : 1 0 0 H Z | |
C E N T E R | : 1 0 0 H Z |
S U R R O U N D | : 1 0 0 H Z |
S U R R B A C K | : - - - - - |
S U B W O O F E R | : - - - - - |
B A S S M G R | : G L O B A L |
B A C K T O M A S T E R M E N U
Figure 6
To change the setting for any of the three speaker groups, press the ⁄/¤ Buttons n until the cursor is next to the line where you wish to make a change and then press the ‹/› Buttons o until the desired setting appears. The available choices at which point
In cases where LARGE has been selected as the
left/right speakers will automatically change in tandem so that the same setting appears for both speaker positions. This ensures that there is no “hole” in the sound field due to different crossover points at the front and subwoofer speakers.
When all crossover settings have been made, or in those cases where none are needed, press the ¤ Button n so that the cursor is next to the BASS MGR line to make the final setting on this menu.
This setting allows you to use the same speaker size configuration for all inputs, or to have different settings for each input. In most cases the factory default set- ting of GLOBAL will be appropriate, as most lis- teners do not need to have individualized settings. However, some listeners, particularly those with full- range front speakers that are used for both movies and music, may prefer that different bass management be used when listening to music through a CD player as opposed to a movie from a DVD player, VCR or cable/satellite
If you wish to customize the speaker settings for each input, make certain that the MODE line of the SPEAKER SETUP menu is set to SIZE, and that the cursor is on the BASS MGR line, and press the ‹/› Buttons o so that INDEPENDENT appears. When this setting is entered by exiting the menu, you may need to go back to the INPUT menu to select another input, and then return to this menu page again to change the settings for that input. Repeat the procedure for any input where you wish to have a different set of speaker configurations.
NOTE: When the INDEPENDENT setting is activated, you may assign different speaker size set- tings to each input to accommodate different bass management settings that match your preferences with the type of program material normally used with a particular source (for example, when movies are played from DVD and music from a CD player). However, the actual speaker crossover settings are set only once and do not change with the input selection. The reason is that, while bass management preferences may vary, the actual speakers remain the same, regardless of the
When all speaker selections have been made, press the ¤ Button n and then the Set Button p to return to the MASTER MENU.
Delay Settings
Due to the different distances between the listening position for the front channel speakers and the sur- round speakers, the amount of time it takes for sound to reach your ears from the front versus surround speakers differs. You may compensate for this differ-