REAR-PANEL Connections

™

31	j h	f	d b	· ‡
k	i	g	e c	a ° ﬂ

ﬁ	‹
	›
	135
(100W, 1A MAX)
(50W, 0.5A MAX)

∞	¶	ª	⁄
§	•	‚	¤

NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this product at www.harmankardon.com.

¡ FM Antenna Jack		¤ DVD Component Video Inputs		d Video 1 S-Video Output
™ CD Audio Inputs		‹ AC Power Cord		e Video 2 S-Video Input
£ Tape Outputs		› Switched AC Accessory Outlet		f 6/8-Channel Direct Inputs
¢ Tape Inputs		ﬁ Unswitched AC Accessory Outlet		g Video Monitor Output
∞ Subwoofer Output		ﬂ Optical Digital Audio Output		h DVD Audio/Video Inputs
§ Front Speaker Outputs		‡ Coaxial Digital Audio Output		i Video 1 Audio/Video Inputs
¶ Surround Back Speaker Outputs		° S-Video Monitor Output		j Video 1 Audio/Video Outputs
• Surround Speaker Outputs		· Coaxial Digital Audio Inputs		k Video 2 Audio/Video Inputs
ª Center Speaker Outputs		a DVD S-Video Input		31 AM Antenna Terminals
‚ Component Video Monitor Outputs		b Video 1 S-Video Input
⁄ Video 2 Component Video Inputs		c Optical Digital Audio Inputs

NOTE: To assist in making the correct connections		Front Right:	Red	Subwoofer:	Purple
for multichannel input, output and speaker connec-		Center:	Green	Coaxial Digital Audio:	Orange
tions, all connection jacks and terminals are color-		Surround Left:	Blue	Composite Video:	Yellow
coded in conformance with the CEA standards as		Surround Right:	Gray	Component Video “Y”:	Green
follows:		Surround Back Left:	Brown	Component Video “Pr”:	Red
Front Left:	White	Surround Back Right:	Tan	Component Video “Pb”:	Blue

¡FM Antenna Jack: Connect the supplied indoor (or an optional external) FM antenna to this terminal.

™CD Audio Inputs: Connect these jacks to the analog audio output of a compact disc player or CD changer.

£Tape Outputs: Connect these jacks to the RECORD/INPUT jacks of an audio recorder.

¢Tape Inputs: Connect these jacks to the PLAY/OUT jacks of an audio recorder.

∞Subwoofer Output: Connect this jack to the line- level input of a powered subwoofer. If an external sub- woofer amplifier is used, connect this jack to the sub- woofer amplifier input.

§Front Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right speakers. When making speaker connections always make certain to maintain correct polarity by connecting the color-coded (white for front left and red for front right) (+) terminals on the AVR 135 to the red (+)

terminals on the speakers and the black (–) terminals on the AVR 135 to the black (–) terminals on the speakers. See page 12 for more information on speaker polarity.

¶Surround Back Speaker Outputs: These speaker terminals are normally used to power the sur- round back speaker in a 6.1-channel system. Connect these outputs to the matching + and – terminals on your surround back channel speaker. In conformance with the CEA color-code specification, the brown ter-

REAR-PANEL CONNECTIONS 7

REAR-PANEL CONNECTIONS

· ‡