Brother PQ1500S operation manual Changing Needles and Light Bulb, Changing bulbs

Page 11

Changing Needles and Light Bulb

Note

Please make sure power is off before carrying out the following operations. There is a chance of injury if the machine accidentally starts running during this operation.

Changing the Feed Pin

1Set the feed dogs to “vel-

vet” position. (See page 5.)

2Remove needle, presser

foot and needle plate.

Note

Please make sure power is off before carrying out the following operation. The glass plate over the light bulb will be hot immediately after using the machine, therefore it is advisable to wait until the light bulb has had a chance to cool down before

Changing the Needle

1 Turn the sewing ma-

3Lower presser foot and turn hand wheel until feed

pin is in its highest position.

changing bulbs.

chine off. Raise needle

to highest position us-

ing hand wheel, and

lower presser foot.

2Loosen screw with screwdriver, and re- move needle.

3Hold the needle with the flat side to the right, and insert the needle as far as it will go. Make sure needle is screwed in tightly.

✽If the needle is not ad- equately inserted or the screw is loose, this may break the needle or cause a breakdown and the needle threader will not work.

✽Check needles on a flat surface to make sure they are not bent.

Note

Screwdriver

The needle should lay parallel to a surface.

Flat surface

Lay needle on a flat surface (such as the needle plate or a plate

of glass).

4Insert small screwdriver (in- cluded) as shown in diagram.

5While holding spring with fingertip, lower the feed pin changer onto the needle to pick it up.

6Attach new feed pin to feed pin changer, lower and attach while holding

spring with fingertip.

7Remove screwdriver.

8 Re-attach needle plate, needle and presser foot.

Changing Light Bulbs

1Turn off power.

2Remove screw from head.

3Remove bulb housing.

4Unscrew bulb and re- move.

5Screw in new bulb.

Sewing Light:

See page 20.

6Re-attach bulb housing and tighten screw.

Screwdriver

230V 120V

Light Light

HLX5 needles should be used; however, Schmetz 130/ 705H may also be used under normal circumstances.

Bulb Bulb

6

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manuel D’UTILISATION Important Safety Instructions For Users in the UK, EIRE, Malta Cyprus only Congratulations on Choosing Brother Sewing Machine Contents Part Name Part Code AccessoriesMachine Features Before You Begin Fabric Extension Table Presser Foot Pressure Adjustment DialPresser Foot Lift Lever Knee LiftThread Cutter Button Press with the presser lever down Light SwitchThread Cutter Button Foot Pressure and Feed Dog PositionChanging bulbs Changing Needles and Light BulbShaft ThreadingDo not move bobbin winding clutch while machine is running See the following illustrations Thread Notch BobbinFull. Take the foot off foot controller Bobbin Insertion When the fabric extension table is set in placeUpper Threading Using the Automatic Needle ThreaderPage Thread Tension Stitch Samples and Needle ChartStitch Samples Presser Feet Changing Presser FeetChanging Presser Feet Zipper Foot Fabric Velvet Quilt Synthetic Suede Knit Coading Others Basic SewingBasic Sewing Before sewing Begin sewing Backstitches Finish SewingWith your right hand, put Rolled Hem FootReinforce base of opening by sewing over it twice Secure the zipper with basting and sew along the markTo slide the foot from left to right Needle may break and cause injuryAttach invisible zipper foot Invisible Zipper FootFoot Forked part Operation lever Quilting FootWalking Foot Wise loosen due to vibration Fabric Separatorfor joining lining to fabricSeam Guide Caring for Your Machine Cleaning the MachineKeep Your Sewing Machine Clean PrecautionsLoop Seam Trouble ShootingPrécautions d’utilisation Points d’essai et tableau d’aiguilles Accessoires Fonctions de la machine Avant de commencerRemplacement de l’aiguille et de l’ampoule de lampe EnfilageRemarque AccessoiresNo. de pièce Désignation Code de pièce Fonctions de la machine Disque sélecteur de tension du fil Avant de commencerVolant Levier de point arrièreButée Levier du pied-de-bicheDisque sélecteur de réglage de la pression du pied-de-biche Aiguille de ’indicateur de pressionInterrupteur de la lampe Bouton de ciseauxBouton de réglage des griffes d’entraînement Ait refroidi avant de changer cette dernière Remplacement de l’ampouleRemplissage de la canette EnfilageSa position d’origine Lorsque la table de rallonge pour tissu est en place Insertion de la canetteUtilisation de l’enfileur automatique Aiguille HLX5 Fil #20 #30 #50 #60 #11 #14 #16 Tension des fils Points d’essai et tableau d’aiguillesPoints d’essai Pied transparent Pour ouatinage/ matelassage Changement du pied-de-bicheChangement du pied-de-biche Pied pour fermeture à glissière Pied pour ourlet RouleautéCouture de base Couture de basePied pour ourlet rouleauté Bien éteindre la machine avant de changer le pied-de-biche Couture 3,2 mm Fermeture à glissière Pied 1/4Faufile Pied double-entrainement Pied transparent pour ouatinage/matelassageSéparateur de tissu Enfileur Doublure Séparateur Velours Guide de couturePrécautions Entretien de la machine à coudreNettoyage de la machine Points de graissage Maintenir la machine à coudre constamment propreLa machine fait du bruit DépannagePage English French

PQ1500S specifications

The Brother PQ1500S is a high-performance sewing machine designed specifically for quilters and sewing enthusiasts. Known for its speed, precision, and versatility, this model caters to a wide range of sewing projects, from quilts to home decor and garment making.

One of the standout features of the PQ1500S is its remarkable sewing speed. It can reach up to 1,500 stitches per minute, allowing for efficient stitching without compromising on quality. This rapid pace is particularly beneficial for quilters who need to cover large areas quickly. Additionally, the machine includes a precision pin-feed system that ensures the fabric is fed evenly, preventing any misalignment that could disrupt the sewing process.

The PQ1500S is equipped with an adjustable presser foot pressure, giving users the ability to tailor the machine’s pressure to the thickness of the fabric. This feature is vital when working with various materials, ensuring that delicate fabrics are not damaged while heavier materials are securely held in place.

Another characteristic that sets the PQ1500S apart is its extensive throat space. With a sizable work area of 11.25 inches, the machine provides ample room for maneuvering larger projects, making it particularly suitable for quilting. The built-in extension table further enhances the workspace, allowing for smooth movement of bulky quilts.

The adjustable stitch length, which ranges from 1 to 7 millimeters, is another critical feature, enabling users to customize their stitch for different projects. Additionally, the machine offers a wide selection of presser feet, including the walking foot and free-motion quilting foot, further increasing its versatility.

Technologically, the Brother PQ1500S incorporates an automatic needle threader, simplifying the threading process and minimizing eye strain. An easy-to-access bobbin compartment also supports quick changes and allows for a clear view of the remaining thread.

Overall, the Brother PQ1500S combines speed, precision, and ease of use, making it an excellent choice for both seasoned quilters and novice sewers. Its range of features and technologies makes it a standout option in the realm of sewing machines, promising quality results for a variety of sewing endeavors. Whether crafting quilts or tackling home decor projects, the PQ1500S is built to meet the needs of modern sewing enthusiasts.
Top Page Image Contents