Brother 885-V60 appendix Needle and presser foot section, Operation buttons

Page 11

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

Needle and presser foot section

aNeedle threader (for models equipped with the needle threader) (page 25)

bButtonhole lever

Lower the buttonhole lever when sewing buttonholes and bar tacks.

cPresser foot holder

The presser foot is installed onto the presser foot holder.

dPresser foot holder screw

Use the presser foot holder screw to hold the presser foot holder in place.

ePresser foot

The presser foot applies pressure consistently on the

fabric as the sewing takes place. Attach the appropriate

1

presser foot for the selected stitching.

fNeedle plate cover release

Use when removing the needle plate cover.

gNeedle plate cover

Remove the needle plate cover to clean the race.

hFeed dogs

The feed dogs feed the fabric in the sewing direction.

iQuick-set bobbin (for models equipped with the quick- set bobbin)

You can start sewing without pulling up the bobbin thread.

jBobbin cover

Open the bobbin cover to set the bobbin.

kNeedle plate

The needle plate is marked with guides for sewing straight seams.

lNeedle bar thread guide

Pass the upper thread through the needle bar thread guide.

mPresser foot lever

Raise and lower the presser foot lever to raise and lower the presser foot.

nNeedle clamp screw

Use the needle clamp screw to hold the needle in place.

Operation buttons

The operation buttons help you to easily perform various basic sewing machine operations. The operation buttons differ depending on the sewing machine model.

aReverse/reinforcement stitch button

Press the reverse/reinforcement stitch button to sew reverse stitches. Reverse stitches are sewn by keeping the button pressed down to sew in the opposite direction. For details, refer to “Sewing reinforcement stitches” (page 40).

■Buttons provided on some models

b Start/stop button (for models equipped with the start/stop button)

Press the start/stop button to start or stop sewing. The machine sews at a slow speed at the beginning of sewing while the button is depressed. When sewing is stopped, the needle is lowered in the fabric. For details, refer to “Starting to sew” (page 39).

c Needle position button (for models equipped with the needle position button)

Press the needle position button to raise or lower the needle. Be sure to raise the needle before threading the needle. Use this button to change the sewing direction or for detailed sewing in small areas. Pressing the button twice sews one stitch.

dSewing speed controller (for models equipped with the sewing speed controller)

Slide the sewing speed controller to adjust the sewing speed.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Sewing Basics Utility Stitches Appendix Page Important Safety Instructions For a longer service life For Users in the UK, EIRE, Malta Cyprus only Contents Utility Stitches About zigzag foot J AccessoriesIncluded accessories Accessory compartment Optional accessoriesMain parts Names of Machine Parts and Their FunctionsButtons provided on some models Needle and presser foot sectionOperation buttons Spool pin Operation panelBPushplace.the spool pin down until it locks into Shown.1Power supply Using Your Sewing MachinePower supply precautions Side of stitch selection key Foot controllerChanging the needle stop position Aright to select the desired sewing speedBRemove the spool cap Threading the MachineWinding the bobbin DSlide the spool cap onto the spool pin KTrim the excess thread above the bobbin Make sure that the thread passes under the pretension diskFor models equipped with the fast bobbin winding system Thread is cut to a suitable length Actual size 11.5mm 7/16 inch This model Lower threadingFor models equipped with the quick-set bobbin Slit Cutter Cut the thread with the cutter Upper threading GSlide the spool cap onto the spool pin Remove the spool capThread take-up lever Needle bar thread guide Catch the thread on the hook as shown below DFully lower the needle threader leverBobbin cover should still be removed Drawing up the lower threadLightly hold the end of the upper thread Needle types and their uses Needle precautionsReplacing the Needle Replacing the needle Checking the needleCLower the presser foot lever Install the twin needle in the same wayFor details, refer to steps a through l of Upper threading Installthread.the thread spool and thread the upperSewing with the twin needle Thread the upper thread for the left needleTurn on the sewing machine Select a stitch For details, refer to step a through l of Upper threadingHAttach zigzag foot J Models equipped with a needle threaderMark on the wheel points up. With models Replacing the Presser FootReplacing the presser foot Replace the presser foot as described belowFor details, refer to Replacing the presser foot Removing the presser foot holderRemove the presser foot Page Sewing General sewing procedureFollow the basic procedures below to sew On the left changes the digit on the left DIfwidth.necessary, adjust the stitch lengthSelecting stitching Press the + or side of to increase orRight of in the LCD Adjusting the stitch length and widthBRaise the presser foot lever Starting to sewOn the wheel points up. With models equipped Each other Raise the presser foot leverSewing reinforcement stitches Upper tension is too loose Thread tensionCorrect tension Upper tension is too tightSewing curves Useful Sewing TipsTrial sewing Changing the sewing directionPresser foot remains level, allowing the fabric to be fed Sewing hook-and-loop FastenerSlide the flat bed attachment to the left to release it Sewing thin fabricsSewing stretch fabrics Stitching cylindrical piecesCSew with the edge of the fabric Using zigzag footOvercasting Stitches Attach zigzag foot J Select stitch , orAttach overcasting foot G Select stitch or Using overcasting footFor details, refer to Starting to sew When sewing is finished, cut the threadBasic Stitching Basic stitchingReverse the skirt or pants Blind HEM StitchingFold back the fabric inside along the basting If the needle does not catch the hem fold Stitch widthThick fabric Normal fabric Auto Rfc. Automatic Reinforcement **Rfc. Reinforcement Buttonhole SewingButtonholes can be sewn and buttons can be sewn on Size of the buttonhole is set Raiseposition.the buttonhole lever to its original Once sewing is completed,Trim off any excess of the gimp thread Sewing buttonholes on stretch fabricsWith stitch Select stitch Button sewingDPlacethe fabric.a button between the presser foot ESelect a stitchNormally, the feed dog position lever is Positioned at After sewing for about 10 seconds at lowRefer to Basic stitching on Zipper InsertionRev. Reverse Do not use reverse stitching Sew the stitching in order, from a to c FSelect stitchBAttach zigzag foot J CSelect stitch Sewing Stretch Fabrics and Elastic TapeStretch stitching Elastic attachingUtility Stitches Piecing APPLIQUÉ, Patchwork and Quilt StitchingRemove the basting, if necessary AppliquésPatchwork crazy quilt stitching PiecingSewing QuiltingFor a seam allowance on the left side DSelect stitchARemoveholder. the presser foot and the presser foot Using the optional quilting guideFree-motion quilting † Walking foot † Presser foot holderSlide the feed dog position lever, located at Attach zigzag foot J Select stitch Start sewing Reinforcement StitchingTriple stretch stitching Bar tack stitchingPullpossible.down the buttonhole lever as far as Once sewing is completed,Decorative Stitching Fagoting CSew parallel stitching at intervals of 10 mm 3/8 inch Scallop stitchingSmocking DTrim along the stitchesUnfold the fabric, and then iron the tucks down to one side Shell tuck stitchingJoining Fold the fabric along the bias BAttach zigzag foot JHeirloom stitching Utility stitches Stitch SettingsPattern No Decorative Stitch Buttonhole Bar tack For decoration, etc For decoration, etc Yes Remove the bobbin case MaintenanceCleaning the machine surface Cleaning the bobbin caseAlign the U and marks Needle plate cover Upper thread tightened up TroubleshootingFrequent troubleshooting topics Cause Incorrect upper threading SymptomFor details, refer to Cleaning the bobbin case on Tangled thread on wrong side of fabricHFeed the upper thread as shown in the illustration below Thread take-up lever Incorrect thread tension If threads remain in the bobbin case, remove them Fabric is caught in the machine and cannot be removedDRemoveholder. the presser foot and presser foot Be careful not to drop the removed screws in the machine Memo Correctly thread the machine Do not yet install the presser foot and threadChecking machine operations Turn on the machine Select middle needle position stitchList of symptoms Fabric being Sewn with While sewingMachine does Not workOr breaks UpperThread breaks LowerPitched noise While sewing Stitches areSkipped There is a highThread After sewingThread has Tightened upOperation beep for models equipped with the operation beep Error MessagesNumerics Index42 , 45 English 885-V60/ V61 XE6528-1011

885-V60 specifications

The Brother 885-V60 is a versatile sewing machine that caters to both novice and experienced sewers alike. With its myriad of features and advanced technologies, it stands out as a reliable tool for creating a wide variety of projects, from basic mending to intricate quilting.

One of the main features of the Brother 885-V60 is its 60 built-in sewing stitches, which include utility stitches, decorative stitches, and auto-size buttonhole options. This selection allows users to explore their creativity and tackle diverse sewing tasks with ease. The machine also offers a one-step buttonhole function, making it simple to create perfectly sized buttonholes in a matter of seconds.

The Brother 885-V60 boasts a generous sewing area, equipped with a large extension table that provides ample space for handling larger projects like quilts. This extended work surface enhances stability and support, ensuring that even extensive pieces can be managed comfortably. The adjustable stitch width and length further allow for customization of stitches, catering to individual preferences for each project.

Another highlight of the Brother 885-V60 is its automatic needle threader, which simplifies the threading process and reduces eye strain, particularly for those who may struggle with manual threading. The machine also features a jam-resistant drop-in bobbin system, making it quick and straightforward to replace the bobbin without any complications.

The LED lighting built into the Brother 885-V60 illuminates the workspace, ensuring visibility while working on intricate designs, even in low-light conditions. This feature is invaluable for detailed projects where precision is crucial.

In terms of technology, the Brother 885-V60 includes a variety of presser feet, allowing users to switch between functions easily. The machine supports various feet such as the zipper foot, walking foot, and quilting foot, providing flexibility and enhancing the sewing experience.

Additionally, the integrated speed control feature offers users the ability to adjust the sewing speed according to their comfort level, making it easier for beginners to build confidence or for seasoned sewers to work on complex projects efficiently.

Durable and built to last, the Brother 885-V60 is an excellent investment for anyone looking to enhance their sewing capabilities. With its combination of user-friendly features, advanced technology, and robust performance, this sewing machine is poised to meet the demands of a wide range of sewing enthusiasts.
Top Page Image Contents