IBM A40I TYPE 2271 Diagnostic error codes, In the following index, X can represent any number

Diagnostic error codes

Refer to the following diagnostic error codes when using the diagnostic tests. See ″Diagnostics″ on page 7 for the specific type for information about the diagnostic programs.

In the following index, X can represent any number.

Diagnostic Error Code	FRU/Action
000-000-XXX	1.	No action
BIOS Test Passed
000-002-XXX	1.	Flash the system
BIOS Timeout
	2.	System board
000-024-XXX	1.	Flash the system
BIOS Addressing test failure
	2.	System board
000-025-XXX	1.	Flash the system
BIOS Checksum Value error
	2.	Boot block
	3.	System board
000-026-XXX	1.	Flash the system
FLASH data error
	2.	Boot block
	3.	System board
000-027-XXX	1.	Run Setup
BIOS Configuration/Setup error
	2.	Flash the system
	3.	Boot block
	4.	System board
000-034-XXX	1.	Reboot the system
BIOS Buffer Allocation failure
	2.	Flash the system
	3.	Run memory test
	4.	System board
000-035-XXX	1.	Flash the system
BIOS Reset Condition detected
	2.	System board
000-036-XXX	1.	Flash the system
BIOS Register error
	2.	Boot block
	3.	System board
000-038-XXX	1.	Flash the system
BIOS Extension failure
	2.	Adapter card
	3.	System board
000-039-XXX	1.	Flash the system
BIOS DMI data error
	2.	System board
000-195-XXX	1.	Information
BIOS Test aborted by user
	2.	Re-start the test, if necessary
000-196-XXX	1.	Press F3 to review the log file
BIOS test halt, error threshold exceeded
	2.	Re-start the test to reset the log file

Chapter 6. Symptom-to-FRU Index 39