IBM A40 TYPE 6840, A40I TYPE 2271, A40P TYPE 6841 manual POST Error Code

POST Error Code	FRU/Action
16XX	1.	36/38 Workstation Adapter
1762	1.	Run Configuration. (See “Setup Utility
Hard disk drive configuration error
		program” on page 7.)
1780 (Disk Drive 0)	1.	See “Power supply” on page 33.
1781 (Disk Drive 1)
	2.	Hard Disk Drive
1782 (Disk Drive 2)
	3.	System Board
1783 (Disk Drive 3)
	4.	Riser card
	5.	Hard Disk Cable
	6.	Power Supply
180X, 188X	1.	Run Setup and verify PCI/ISA
PCI configuration or resource error
		configuration settings.
	2.	If necessary, set ISA adapters to Not
		available to allow PCI adapters to
		properly configure.
	3.	Remove any suspect ISA adapters.
	4.	Rerun diagnostics.
	5.	PCI Adapter
1962	1.	Possible hard disk drive problem; see
Boot sequence error
		“Hard disk drive boot error” on page
		38.
209X	1.	Diskette Drive
	2.	Diskette Cable
20XX	1.	BSC Adapter
Not listed above
21XX	1.	SCSI Device
	2.	16-bit AT Fast SCSU adapter
	3.	Alternate BSC adapter
2401, 2402	1.	Display
If screen colors change
2401, 2402	1.	System Board
If screen colors are OK
	2.	Display
2409	1.	Display
2410	1.	System Board
	2.	Display
2462	1.	Check cable connections
Video memory configuration error
	2.	Run Setup and verify video
		configuration settings
	3.	Video Memory Modules
	4.	Video Adapter (if installed)
	5.	System Board
4611, 4630	1.	Multiport/2 Interface Board
	2.	Multiport/2 Adapter

Chapter 6. Symptom-to-FRU Index 65