IBM A40 TYPE 6840, A40I TYPE 2271, A40P TYPE 6841 manual Diagnostic Error Code

Diagnostic Error Code	FRU/Action
086-196-XXX	1.	Press F3 to review the log file
Mouse Port interface test halt, error
	2.	Re-start the test to reset the log file
threshold exceeded
086-197-XXX	1.	Make sure the component that is called
Mouse Port interface test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
086-198-XXX	1.	If a component is called out, make sure it
Mouse Port interface test aborted
		is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section
086-199-XXX	1.	Go to the ″Undetermined problems″
Mouse Port interface test failed, cause
		section
unknown
	2.	Flash the system and re-test
	3.	Replace component under function test
089-000-XXX	1.	No action
Microprocessor Test Passed
089-XXX-XXX	1.	Microprocessor(s)
Microprocessor failure
	2.	System board
089-195-XXX	1.	Information
Microprocessor Test aborted by user
	2.	Re-start the test, if necessary
089-196-XXX	1.	Press F3 to review the log file
Microprocessor test halt, error threshold
	2.	Re-start the test to reset the log file
exceeded
089-197-XXX	1.	Make sure the component that is called
Microprocessor test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
089-198-XXX	1.	Flash the system and re-test
Microprocessor test aborted
	2.	Go to the ″Undetermined problems″
		section
089-199-XXX	1.	If a component is called out, make sure
Microprocessor test failed, cause unknown
		it is connected and/or enabled
	2.	Go to the ″Undetermined problems″
		section
	3.	Flash the system and re-test
	4.	Replace component under function test
170-000-XXX	1.	No action
Voltage Sensor(s) Test Passed
170-0XX-XXX	1.	Flash system
Voltage Sensor(s) failure
	2.	System board

Chapter 6. Symptom-to-FRU Index 53