IBM A40 TYPE 6840, A40I TYPE 2271, A40P TYPE 6841 Installing internal drives in bays 1, 2, 3 and

Bay 1 - Max Height:	41.3 mm (1.6 in.)
	CD-ROM drive (standard in some models)
	5.25-inch hard disk drive
Bay 2 - Max Height:	41.3 mm (1.6 in.)
	5.25-inch hard disk drive
	3.5-inch hard disk drive (requires a mounting bracket)
	CD-ROM drive
	DVD-ROM drive
Bay 3 - Max Height:	25.4 mm (1.0 in.)
	3.5-inch diskette drive
Bay 4 - Max Height:	25.4 mm (1.0 in.)
	Hard disk drive
	3.5-inch removable drive
Bay 5 - Max Height:	25.4 mm (1.0 in.)
	Hard disk drive
Bay 6 - Max Height:	25.4 mm (1.0 in.)
	Hard disk drive
Bay 7 - Max Height:	25.4 mm (1.0 in.)
	Hard disk drive

Installing internal drives in bays 1, 2, 3 and 4

1.Remove the cover (see “Removing the cover” on page 15).

2.If the drive you are installing is a removable-media drive, remove the bay panel from the front bezel.

3.Insert a flat–bladed screwdriver into one of the slots on the static shield in the drive bay into which you are installing the drive and gently pry the static shield loose from the drive bay.

Chapter 4. Installing Options 17