Kenmore 625.38816 Program Thetimer, SET Water Hardness Number, SET Recharge Regeneration Time

Page 7

C. PROGRAM THETIMER

B SET WATER HARDNESS NUMBER

•Press the SELECT button once to display 25 (flashing) and HARDNESS.

The grains per gallon (gpg) hard-

ness of your water supply is on

your water analysis report. Be sure to enter water test results on

page A, for future reference.

If your water supply contains iron, compensate for

it by adding to the water hardness number. For ex- ample, assume your water is 20 gpg hard and contains 2 ppm iron. Add 5 to the hardness number for each I ppm of iron. In this example, you would use 30 for your hard- ness number.

 

20

gpg hardness

2 ppmironx5

= 10 +10

 

(times)

30

HARDNESS NUMBER

•Press the UP / DOWN buttons to set your water

hardness number in the display. The DOWN button

moves the display to 1. The UP button moves the

display to the highest setting (see maximum setting for your model in the specifications).

Note:

Each press of the UP / DOWN button changes the

display by I between I and 25. Between 25 and the

highest number, the display changes 5 at a time... 25, 30, 35, etc. Holding the UP or DOWN but- ton in changes the display twice each second.

_SET RECHARGE (REGENERATION) TIME

• Press the SELECT button to display 2:00 A_M

(flashing)

and RECHARGE

TIME.

7,1717 A_

 

 

 

At the 2:00 AM recharge time

C'uu /

 

setting, the softener begins re-

 

generation

(see pages 2-3

and

 

2-4) at 2:00 AM, ending no later

than 4:00 AM. This is a good time in most house- holds because water is not being used (see Auto- matic Bypass, page 2- 4). If a different recharge time

setting would be better for your household, do the following.

•Press the UP / DOWN buttons to set the desired

recharge starting hour. Be sure to observe the AM- PM as you did when setting the present time of day.

Note:

Each press of the UP / DOWN buttons changes the

display I hour. Holding the buttons in changes the display twice each second.

_SET SALT EFFICIENCY

A new feature in this modelis Salt Efficiency. When this feature is ON, the unit will operate at salt effi-

ciencies of 4000 grains of hardness per pound of salt or higher which will reduce the softeners salt usage.

•Press and hold for 3 seconds the SELECT button

until the following screen is displayed.

.,o

I

WATER METER (A) SWlTGH (B)

More information on this particular display is

found in the Troubleshooting Section of the manual,

under Manual Initiated Electronics Diagnostics.

•Once in this display, press the SELECT button and

one of the following two displays is shown.

_I

•Press the UP button to set this feature ON, press the DOWN button to set OFF. When the Salt Effi-

ciency is ON, the icon will be displayed in the nor- mal run display.

•Press the SELECT button once again, to com-

plete initial programming, and RECHARGE TO- NIGHT shows in the display.

IF YOU NEED HELP PROGRAMMING THE TIMER, CALL TOLL FREE,

NUMBER 1- 800-426- 9345.

SEE PAGE 2-1FOR OTHER FACE PLATE TIMER FEATURES.

1-4

Problems, Questions? Call 1-800-426-9345 Kenmore Water Line

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Save this Manual Owners ManualFacts and Figures to Keep Sears Residential Water SoftenerIi iiiii!iiii Water Softener Start UP Safety GuidesElectrical Check List of STEP-BY-STEP Guides to InstallNumbers Referred Are Unless OtherwiseRlr Program the TimerSET Present Time of DAY SET Salt Efficiency Program ThetimerSET Water Hardness Number SET Recharge Regeneration TimeYou can sanitize the softener with or without salt Sanitize the Water SoftenerStorage tank Water Softening Salt with Iron Remov Fill the Storage Tank with SaltNOW Faceplate Timer FeaturesError Code Extra RechargeWater Flow Through Softener in Fill Service RegenerationWater Flow Through Softener in Service Softener WorksWater Flow Through Softener Fast Rinse Iii......iii.ii.....I HOW Your Water Softener WorksWater Flow Through the Softener Brining and Brine Rinse Water Flow Through Softener in BackwashAutomatic Bypass Electronics Salt Bridge Salt Refilling Storage TANK, Salt BridgeSalt Bridge Cap Keeping the Water Softener CleanCleaning Nozzle & Venturi Iron from Resin BEDTer Protect the Water Softener from FreezingDrain All Water From Softener Problem Cause Correction Checklist ... to Help YOU Save MoneyCare of Your Water Softener Bypass Valves Dimensions / SpecificationsUltrasoft 150 Timer SR Code SR24 Jiiiii iiiit Know about Your Water SoftenerPressure Drop PSI vs. Flow Rate GPM Know about Your Water SoftenerEfficiency Rating Transformer TroubleshootingFaceplate Vice positionOpena Nearby Soft Water Faucet Automatic Electronic DiagnosticsInitiated Electronics Diagnostics Possible Defect CodeUltraSoft Service TECH. InformationReturn the present time display -- Press the SE Flow Cycle Flow Rates Gallons PER MINFill flow to salt Storage tank Liters Drain LitersLieve Pressure Rotary Valve ServiceDisassembly AssemblyFill Cycle Water Flow Through the Softener Valve Service CycleIii!iiiiJi !ii,iiJ!iiiil Service TECH. Information Water Flow Through the Softener Valve Jservice TECH. InformationWater Softener Complete Iiii!l Repair Parts for Water SoftenerKEY Part Description Number Brine Valve Assembly 1REPAIR Parts for Water SoftenerInlet Outlet Grounding Clamps 86 ÷ Ji iiiiiiiii!l Repair Parts for Water Softener7187065 7129716 Repair Parts for Water SoftenerValve Assembly KEY Part NO. Number800 366 Part UltraSoft 100 UltraSoft 150800 488

625.38815, 625.38816 specifications

The Kenmore 625.38816 and 625.38815 are two innovative models of air purifiers that showcase Kenmore’s commitment to providing clean air solutions for homes. These models are engineered to enhance indoor air quality by effectively capturing and eliminating airborne pollutants, allergens, and odors.

One of the standout features of the Kenmore 625.38816 and 625.38815 is their advanced multi-stage filtration system. Both models utilize a HEPA filter that is capable of capturing particles as small as 0.3 microns, which includes dust, pollen, pet dander, and smoke. This feature is particularly beneficial for allergy sufferers and those with respiratory issues, as it significantly reduces the presence of irritants in the air.

In addition to the HEPA filter, these models are equipped with activated carbon filters that target and neutralize household odors, such as cooking smells and pet odors. This dual filtration approach ensures not only cleaner air but also a fresher living environment.

Both the Kenmore 625.38816 and 625.38815 boast a user-friendly digital display that allows for easy monitoring and control of air quality. The intuitive interface enables users to adjust fan speeds, set timers, and check filter replacement indicators with ease. The air purifiers also feature an automatic mode that adjusts fan speed based on the air quality detected through integrated sensors, providing optimal performance without constant manual intervention.

Another key characteristic of these models is their quiet operation. They are designed to run quietly, making them suitable for use in bedrooms and living spaces without causing disturbances. This silent performance does not compromise their effectiveness, and users can enjoy cleaner air while maintaining a peaceful environment.

Energy efficiency is an important consideration for any home appliance, and the Kenmore 625.38816 and 625.38815 models are no exception. Both units are ENERGY STAR certified, ensuring that they consume minimal energy while providing powerful air purification.

In conclusion, the Kenmore 625.38816 and 625.38815 air purifiers stand out for their robust filtration capabilities, user-friendly features, silent operation, and energy-efficient design. They represent a practical solution for anyone seeking to improve indoor air quality, making them a valuable addition to any home.
Top Page Image Contents