Kenmore 625.348670 Full TEN Year Warranty Against Leaks, Full Three Year Electronics Warranty

Page 2

WARRANTY

SEARS RESIDENTIAL WATER SOFTENER

FULL TEN YEAR WARRANTY AGAINST LEAKS

For ten years from the date of purchase, Sears will furnish and install a new current model water soften- er tank or salt storage drum, free of charge, if either the tank or drum develop a leak.

FULL THREE YEAR ELECTRONICS WARRANTY

For a period of three years from date of purchase, Sears will replace the BRINE TANK LIGHT, ELEC-

TRONIC BOARD, SENSOR HOUSING, WIRING HARNESS, TRANSFORMER, MICRO SWITCH, DRIVE MOTOR, OR POWER CABLE, should they be defective in material or workmanship.

FULL ONE YEAR WARRANTY ON WATER SOFTENER

For one year from the date of purchase, when this water softener is installed and maintained in accor- dance with our instructions, Sears will repair, free of charge, all other parts which may be defective in material or workmanship.

TO OBTAIN WARRANTY SERVICE, SIMPLY CONTACT THE NEAREST SEARS SERVICE CENTER THROUGHOUT THE UNITED STATES. This warranty applies only while this product is in use in the United States.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179

If you want your water softener professionally installed, talk to your Sears Salesman. He will arrange for a prompt, quality installation by Sears Authorized Installers.

SEARS INSTALLATION POLICY

SEARS INSTALLATION WARRANTY

All installation labor arranged by Sears shall be performed in a neat, workmanlike manner in accor- dance with generally accepted trade practices. Fur- ther, all installations shall comply with all local laws, codes, regulations, and ordinances. Customer shall also be protected, during installation, by insurance relating to Property Damage, Workman’s Com- pensation and Public Liability.

In addition to any warranty extended to you on the Sears merchandise involved, which warranty be- comes effective the date the merchandise in installed, should the workmanship of any Sears arranged installation prove faulty within one year, Sears will, upon notice from you, cause such faults to be corrected at no additional cost to you.

FACTS AND FIGURES TO KEEP

Fill in the blanks below and keep this book in a safe place so you always have these facts.

Water Softener Model No.†

Serial Number

Date Installed

Water Hardness

 

 

 

Grains Per Gallon

Iron Content

 

 

 

 

 

 

Parts Per Million

*pH

 

 

 

 

Taste And/Or

Odor

 

Water Pressure

 

Pounds/Square Inch

Water Flow Rate

 

 

 

 

Gallons Per Minute

†The model number is on the rating decal, located on the rim, under the salt hole cover.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Model no Save this ManualFull Three Year Electronics Warranty WarrantyFull TEN Year Warranty Against Leaks Full ONE Year Warranty on Water SoftenerRepair Parts Table of ContentsService Tech Information Softener Start UPWater Softener START-UP Safety Guides SectionPlastic SET Water Hardness Number Water Softener START-UP Program the TimerSET Present Time of DAY SET Recharge Regeneration Time Water Softener START-UP 1C.PROGRAM the TimerSET Clean Feature Option Water Softener START-UP 1D. Sanitizing the Water Softener ADD WaterWater Softener START-UP 1E. Fill the Storage Tank with Salt ADD SaltSalt Monitor System HOW Your Water Softener Works 2A. Faceplate Timer FeaturesExtra Recharge Optional Adjustable Settings Gallon or Liter readings defaults to gallonsError Code HOW Your Water Softener Works Faceplate Timer FeaturesLOW Salt Indicator Light Program MemoryService RegenerationWater Flow Through the Softener in Brining and Brine Rinse Automatic Bypass ElectronicsPlease see page 9 for Salt Filling Directions Salt BridgeNozzle & Venturi Care of Your Softener 3B. Keeping the Water Softener CleanCoversnote Iron from the Resin BEDCare of Your Softener 3C. Keep the Softener from Freezing Drain Water from the SoftenerProblem Cause Correction No soft waterOther Things to Know 4A. DIMENSIONS/SPECIFICATIONS SingleFaceplate Service Tech Information 5A.TROUBLESHOOTINGWiring Schematic Always Make These Initial Checks FirstManual Initiated Electronics DIAG- Nostics Service TECH. Information 5A.TROUBLESHOOTINGAutomatic Electronic Diagnostics Possible DefectHF32 shows Manual Advance Regeneration Check Cycle Flow Rates Gallons PER MINAssembly Service Tech Information 5B.ROTARY Valve ServiceDisassembly Servicing the ValveService Cycle Fill CycleBrining and Brine Rinse Cycles Backwash CycleFast Rinse Cycle Service Tech Information Kenmore Water SOFTENER, Model no KEY Part Description NumberBrine Valve Assembly Valve Assembly Parts List Kenmore Water SoftenerPage Page Owners Manual

625.348670 specifications

The Kenmore 625.348670 is a portable dehumidifier designed to improve indoor air quality and provide a comfortable living environment. It is particularly effective in combating excess moisture in homes, especially in areas prone to high humidity such as basements, bathrooms, and laundry rooms.

One of the main features of the Kenmore 625.348670 is its capacity to remove up to 50 pints of moisture from the air per day. This high extraction rate is suitable for rooms up to 4,500 square feet, making it ideal for both residential and commercial applications. The unit is equipped with a built-in humidistat that allows users to set their desired humidity level, automatically turning the dehumidifier on and off as needed to maintain optimal conditions.

The dehumidifier features a user-friendly control panel, complete with an LED display that shows the current humidity level and settings. It also has several operational modes, including continuous operation, allowing for the option of continuous drainage via a drain hose—ideal for areas with persistently high humidity levels. The 625.348670 is designed with convenience in mind, featuring an easy-to-remove water tank for manual drainage when continuous drainage is not an option.

The Kenmore 625.348670 employs advanced technologies for efficient moisture extraction. Its compressor system operates quietly, ensuring minimal disruption in your living space. This unit also emphasizes energy efficiency, working to reduce energy consumption while still effectively controlling humidity levels, which can be a significant advantage in lowering energy bills.

Another characteristic to note is its portability. The unit is designed with built-in handles and caster wheels, allowing easy movement from room to room. Additionally, its compact design ensures it can fit into tighter spaces without sacrificing performance.

Overall, the Kenmore 625.348670 is an excellent solution for anyone looking to control humidity levels in their environment. With its robust design, high moisture removal capacity, user-friendly features, and energy efficiency, it stands as a reliable choice for managing indoor air quality effectively.
Top Page Image Contents