$Ectnon, Manual Advance Regeneration Check

$ECTNON 5

MANUAL ADVANCE REGENERATION CHECK

This check verifies proper' operation of the valve

motor, brine tank fiIl, brine draw, regeneration flow rates, and other controller functions Always make

the initial checks, and the manua! initiated diagnostics.

NOTE: The face plate display must show a steady time (not flashing).

. Press the ON/OFF-HOLD button and bold in for 3 .seconds. RECHARGE NOW begins to flash as the softener enters the fill cycle of regeneration Remove the bdnewe]l cover and, using a flashlight, observe fill water entering the tank

A. If it does not enter' the tank, look for an ob- structed nozzle, venturi, fill flow plug, brine tub- ing, or brine valve riser pipe_

CYCLE FLOW RATES {GALLONS PER MIN.)

FILL (flow to salt storage			tank)	0°3	(1.1	liters)
				,,16(,,6 liters)
BRINE RINSE				.11	(.4 liters)
BACKWASH	}	(flow	to drain)	1.8	(6.8	liters)
BRINING	}
FAST RINSE				1.8	(6.8	liters)

2..After observing fill, press the ON/OFF-HOLD button to move the softener into brining° A slow flow of water to the drain will begin. Verify brine draw from the brine tank by shining a flashlight into the brinewell and observing a noticeable drop in the liquid level

NOTE: Be sure a salt bridge is not preventing water with salt contact.

A.If the softener' does not draw brine:

-nozzle and/or venturi dirty or defective.

-nozzle and venturi not seated properly on gas- ket.

-restricted drain (check drain fitting and hose).

-defective nozzle and venturi seal.

-other inner valve defect (rotor seal, rotor & disc, wave washer, etc.).

NOTE: If water system pressure is low, an elevated

drain hose may cause back pressure, stopping brine draw

SERvicETEC,.NmRMAT O.

3.Again press ON/OFF-HOLD to move the soften- er"into backwash t.ook for a fast flow of water' from the drain hose.

A_ An obstructed flow indicates a plugged top dis- tributor, backwash flow plug, or'drain hose

4_ Press ON/OFF-HOLD to move the softener into

fast rinse. Again look for a fast drain flow. Allow the softener' to rinse for a few minutes to flush out

any brine that may remain in the resin tank from the brining cycle test.

5_ To return the softener to service, press ON/OFF- HOLD.

r] BRINE VALVE

FLOAT SETTING

F2,og

FREEBOARD MEASUREMENT

Distance from top of resin tank, to top of resin bed.

Resin Tank

FREEBOARD

Resin Bed

625.34847 specifications

The Kenmore 625.34847 is a prominent air conditioner that offers an impressive combination of efficiency, cooling power, and user-friendly features. It is designed to provide optimal comfort in residential spaces, making it ideal for homeowners seeking reliable climate control during those sweltering summer months.

One of the standout features of the Kenmore 625.34847 is its powerful cooling capacity. With a BTU rating that can efficiently cool rooms of various sizes, this air conditioner is perfect for living rooms, bedrooms, and office spaces. Its ability to quickly lower indoor temperatures ensures a comfortable environment, even on the hottest days.

The Kenmore 625.34847 employs advanced technology to enhance its performance. It utilizes a high-efficiency inverter compressor, which adjusts the cooling output based on the current temperature and the desired settings. This not only provides more precise temperature control but also minimizes energy consumption, making it a great choice for energy-conscious consumers. The unit is designed with an Energy Star rating, indicating that it meets stringent energy efficiency guidelines established by the EPA.

User convenience is another hallmark of the Kenmore 625.34847. It features a digital display and a user-friendly control panel, allowing for easy adjustments to settings such as temperature, fan speed, and mode. The included remote control further enhances usability, enabling users to make adjustments from the comfort of their couches or beds.

With multiple fan speeds and cooling modes, including energy-saving and sleep modes, this air conditioner adapts to the user’s preferences and daily routines. The unit also boasts a robust air filtration system, which captures dust, allergens, and other airborne particles, contributing to better indoor air quality.

Installation is straightforward, and the unit includes a window installation kit, making setup easy for most homeowners. Overall, the Kenmore 625.34847 stands out as a versatile, efficient, and user-friendly air conditioning solution, making it an excellent choice for anyone looking to enhance indoor comfort while keeping energy costs in check. Its combination of features ensures that it meets the demands of modern living while maintaining a commitment to efficiency and quality.