Kenmore 625.34847 warranty Program the Timer, Down

10.PROGRAM THE TIMER

r r......................

		DOWN
display	UP button	button

\ /

®7

Sears Wate_Line ler CustomerAssistance

_.,800.426-9345

DemandWaterSoftener

J

/\

SELECT button

ON/OFF-HOLD button

(Recharge Tonight-Now)

When the transformer is plugged in, the model code SR22 shows in the face plate display for a few seconds, followed by a test number (example:

$3_0). After the test number, 12:00 AM begins to flash PRESENT TIME and RECHARGE TONIGHT

button, or the highest hardness setting using the UP button,

1, SET PRESENT TIME OF DAY:

show at the bottom of the display

• -•=,= L%*I

CODE	1	PR ESE N'I"TIME
	i

NOTE:

tf SR - - is flashing in the display, press the U£{_ button (FIG 1) until SR22 shows Then, press the

SELECT button to display the flashing 12:00 AM. If other tha_t SR22 shows, when the transformer is

plugged in, please see page 1"7 to reset.

SOUND "BEEPER": A "beeper" sounds while pressing buttons for timer set-up. One beep signals a change in the face plate display. Repeated beeps means the timer will not accept a change from the button you have pressed, telling you to use another button. For example, in setting the hardness (step 2), the beeper sounds repeat- edly when the display reaches i using the DOWN

NOTE:

If the words PRESENT TIME do not show in the display, press the SELECT button (FIG. 1) until they do.

Press the [] UP/DOWN _ buttons to set the present time. Press UP to move the display ahead; press DOWN to move the time backward.

If' the present time is between I

I

noon and midnight, be sure PM _..ESEUr

shows.TiME

If the present time is between ;: ;;_.,_'"",....

midnight and noon, be sure AM l.._.r *,M_ shows.

NOTE:

Each press of the UP or DOWN buttons changes the time by 1 minute. Pressing and holding the buttons changes the time 32 minutes each second.

6