Bose PM8500N manual Selected parameter, Parameter

User Guide	pro.Bose.com
	MAIN MENU < DSP < LIMITING
DSP
Speaker Presets
Array EQ
Delay
➞ Limiting
Description	This display allows you to adjust limiting parameters that allow for loudspeaker driver protection for each output channel.
Available Controls	To access Limiting, use the rotary encoder dial from the DSP menu to highlight, then press to select.
	Navigation Soft Key: Back to DSP menu.
	Menu Soft Key #5: Enables the selection of the output channel (or output groupings) using the rotary encoder dial.
	Menu Soft Key #1: Enables the selection of a peak voltage value, which corresponds to the maximum voltage that may be applied to the driver
	without causing over-excursion. Use the rotary encoder to adjust the selected parameter.
	Menu Soft Key #2: Enables the selection of an RMS voltage threshold value, which works in conjunction with the subsequent attack and release
	values. The RMS voltage setting corresponds to the long-term power handling capability of the loudspeaker. Use the rotary encoder to adjust the
	selected parameter.
	Menu Soft Key #3: Enables the selection of attack time, in milliseconds, related to the RMS limiter. Use the rotary encoder to adjust the selected
	parameter.
	Menu Soft Key #4: Enables the selection of release time, in milliseconds, related to the RMS limiter. Use the rotary encoder to adjust the selected
	parameter.
Options	PEAK: 0.5 to 200 Volts (dependant on output mode), 0.5 V increments
	RMS: 0.5 to 100 Volts (dependant on output mode), 0.5 V increments
	ATTACK: From 500 to 10,000 milliseconds
	RELEASE: From 500 to 10,000 milliseconds
Notes	Values are automatically applied for Bose® loudspeakers set in MAIN MENU < DSP < SPEAKER PRESETS.
	For non-Bose loudspeakers, refer to manufacturer technical specifications for information to properly configure the limiter.
	See “Setting the Limiting Function for use with 3rd Party Loudspeakers” on page 33 for further details.
	MAIN MENU < CONFIGURE

➞CONFIG

Output Config Input Routing

Description	The CONFIGURE menu allows you to access the configuration of input and output signals for a particular system design.
Available Controls	Navigation Soft Key: Return back to MAIN MENU.
	Menu Soft Key #1-5: Changes menu to respective category.
Options	Output Config
	Input Routing

Page 28  User Guide English