Bradley Smoker SS-2/AST/STD Cleaning and Maintenance Instructions, Terreon and panel maintenance

Page 12

Express® Lavatory System SS-Series

 

SS-2/AST/STD, SS-2/AST/JUV

Installation Instructions - For Service Only

Cleaning and Maintenance Instructions

IMPORTANT: Strong alkaline or acid-based chemicals and cleansers should not be used to clean Terreon®. If these chemicals come in contact with the Terreon® surface, wipe off the surface immediately and flush with soapy water.

Terreon® and panel maintenance

The bowl and sprayhead cover are constructed of Terreon®, a densified solid surface material composed of an acrylic modified polyester resin. Terreon® is resistant to chemicals, stains, burns and impact. Surface damage can be easily repaired with everyday cleaners or fine grit abrasives. The panel and sprayhead body are made of an acrylic/ABS laminate, and will not chip, peel or flake. With regular cleaning, your Terreon® fixture will provide years of dependable service.

Cleaning

Daily Cleaning: Wipe the surface with a damp cloth and wipe dry.

Weekly Cleaning: Wipe the surface with a damp cloth and a household liquid detergent. Stubborn stains can be removed as follows:

1.Using a #7448 Scotch-Brite® pad, scrub with an abrasive cleanser such as Ajax®, Comet® or Soft Scrub® and water.

2.Clean thoroughly with soapy water and allow to dry.

Scorch Marks: Although Terreon® will not burn, a lit cigarette in contact with Terreon® could leave a scorch mark. Scorch marks can be removed by buffing with a #7448 Scotch- Brite pad or with an abrasive cleaner.

Repair kit: In the unlikely event your Terreon® surface becomes damaged, it can easily and inexpensively be repaired. Contact your Bradley representative to order a repair kit and be sure to specify color when ordering.

Panel cleaning

IMPORTANT: Do not use abrasive cleansers to clean the panel or sprayhead body. Abrasive cleaners can mar the surface.

Graffiti/Vandalism: If vandals create markings on the panel, Bradley recommends using Motsenbocker’s LIFT OFF® to remove ink and spray paint. Remover #3 is for ink and markers, and Remover #4 is for spray paint. Motsenbocker’s LIFT OFF® can be ordered through Sanitary Maintenance Service Inc. (call 1-800-451-5523 x 425 or visit www.santitarymaintenance.com/product.htm for ordering information). After cleaning with LIFT OFF®, give the panel a final thorough cleaning with a liquid tub and tile cleaner to remove soil and maintain the glossy finish.

NOTE: Use of brand names is intended only to indicate a type of cleaner. This does not constitute an endorsement, nor does the omission of any brand name cleaner imply its inadequacy. Many products named are regional in distribution and can be found in local supermarkets, department and hardware stores or through your cleaning service. It is emphasized that all products should be used in strict accordance with package instructions.

12

5/11/04

Bradley Corporation • 215-1244 Rev. C; EN 03-813

Image 12
Contents For Service Only Table of ContentsPre-Installation Information Supplies required for installationBarrier-free and ADA compliant standard height mounting Barrier-free and ADA compliant juvenile height mountingSS-2/AST/STD Express Lavatory System Dimensions Standard Height MountingStandard Height Juvenile Height SS-2/AST/JUVInstallation Instructions Installation Instructions continueRough SS-2/AST/JUV Express Lavatory System Dimensions Juvenile Height MountingMounting frame to wall Do not overtighten Connecting supply and drain Connecting plastic tubing Completing installation Cleaning and Maintenance Instructions Terreon and panel maintenanceCleaning Panel cleaningSoap Dispenser Maintenance Fill soap dispensersCheck Valve Troubleshooting Cleaning InstructionsIf water just dribbles or does not flow from sprayhead If water sprayhead delivers all hot or cold waterAssembly of Components PanelingOptional Stop/Strainer/Check Valve Other Replacement Parts Pushbutton assemblyMetering Air Valve Maintenance Metering Air Valve TroubleshootingMetering Air Valve Repair Kits and Parts List Problem Water is dripping from the streamformersProblem Valve will not shut off Problem Valve will not turn onProblem Timing can not be adjusted for more than 5 seconds Problem Pushbutton does not work properlyVernatherm Mixing Valve Maintenance and Service Maintenance InstructionsService Suggestions

SS-2/AST/JUV, SS-2/AST/STD specifications

The Bradley Smoker SS-2/AST/STD and SS-2/AST/JUV models represent the pinnacle of modern smoking technology, designed to cater to both novice and seasoned smokers alike. These electric smokers are engineered to deliver a consistent and flavorful smoking experience, making them an essential addition to any outdoor cooking setup.

One of the standout features of the Bradley Smoker models is their innovative smoking system that utilizes a unique process called "smoke generating". These models come equipped with an automatic wood bisquette feeder, which automatically feeds bisquettes into the burner at regular intervals. This ensures that the user achieves a consistent smoke flavor without the hassle of manual refueling. The bisquettes are made from 100% natural wood and come in various flavors, offering users an array of smoking options from hickory to applewood.

Temperature control is another hallmark of the SS-2 models. They are designed with a digital control system that allows users to easily set the temperature and smoking time. The built-in thermostat provides precise heating, ensuring that food is cooked to perfection while infused with rich smoke flavor. The capability to adjust temperature allows for versatile cooking, whether users want to smoke fish, meat, or vegetables.

The stainless steel construction of these smokers not only enhances their durability but also makes them visually appealing. The interior is spacious, providing ample room for a variety of food items. The removable racks are adjustable, allowing users to customize the smoking space based on their specific needs.

Safety features are also a significant aspect of these models. They are designed with an automatic shutoff function that activates if the smoker gets too hot, providing peace of mind during cooking sessions. Furthermore, the insulated walls ensure that the exterior remains cool to the touch, reducing the risk of accidental burns.

Another key characteristic of the Bradley Smoker SS-2 series is their user-friendly design. Whether it's the easy-to-use digital controls or the straightforward assembly process, these smokers are designed to make smoking accessible to everyone.

In summary, the Bradley Smoker SS-2/AST/STD and SS-2/AST/JUV models combine advanced technology, user-friendly features, and durable construction, making them a top choice for those who are serious about their smoking. Whether for backyard barbecues or gourmet cooking, these electric smokers promise to elevate your culinary endeavors with rich, smoky flavors.