Bradley Smoker SS-2/AST/STD Check Valve Troubleshooting, Change soap type, Cleaning Instructions

Page 14

Express® Lavatory System SS-Series

 

SS-2/AST/STD, SS-2/AST/JUV

Installation Instructions - For Service Only

Soap Dispenser Maintenance continued . . .

Step 2: Change soap type

1.Pour out all of the soap from the dispenser.

2.Rinse the soap dispenser with hot water several times until all of the residue is removed, and pump the valve until clean water appears.

3.Rinse the dispenser with ethyl alcohol and allow to air dry.

4.After the dispenser is dry, pour the new soap into the soap dispenser.

Step 3: Cleaning Instructions

Regular cleaning of the soap dispenser is recommended to ensure optimum performance and maximum service life. Cleaning the soap dispenser monthly to remove soap residue, dirt, and other accumulations should become a regular part of your washroom cleaning routine and general maintenance program.

IMPORTANT: Do not use abrasive cleansers to clean the soap tank. Abrasive cleaners can mar the surface.

Clean exterior: Use warm water and soap to clean the exterior of the soap dispenser. Dry with a soft cloth.

Clean interior: Inspect the interior of the soap tank for residue or coagulation of soap. If necessary, clean the soap tank according to the following procedure:

1.Pour out any remaining soap in the tank.

2.Fill the tank half-full of hot water and shake the tank to dislodge the soap residue.

3.Empty the water from the container and repeat steps 1 and 2 until the soap container is clean.

NOTE: If rinsing alone does not remove the soap residue, place a small chain (24 inches long) into the soap tank with hot water and shake the container until the chain dislodges the residue. Then remove the chain and rinse out the soap tank.

Clean internal components: To clean the internal components of the soap dispenser, pump hot water through the soap dispenser until a clean flow of water comes out of the valve.

Check Valve Troubleshooting

If water just dribbles or does not flow from sprayhead:

1.Close the stops and check the valves that supply water to the lavatory system.

2Inspect the stop/check valves for proper installation.

3.Remove the flexible hoses from the stop/check valves and clean the strainers, if necessary.

If water sprayhead delivers all hot or cold water:

1.Close the stops and check the valves that supply water to the lavatory system.

2.Inspect the stop/check valves for proper installation.

3.Remove the flexible hoses from the stop/check valves and clean the strainers, if necessary.

4.Inspect mixing valve for proper installation (see Vernatherm valve on page 19).

•A red marking indicates the hot inlet.

14

5/11/04

Bradley Corporation • 215-1244 Rev. C; EN 03-813

Page 13 Page 15
Image 14
Page 13 Page 15
Contents For Service Only Table of ContentsBarrier-free and ADA compliant standard height mounting Pre-Installation InformationSupplies required for installation Barrier-free and ADA compliant juvenile height mountingSS-2/AST/STD Express Lavatory System Dimensions Standard Height MountingStandard Height Juvenile Height SS-2/AST/JUVRough Installation InstructionsInstallation Instructions continue SS-2/AST/JUV Express Lavatory System Dimensions Juvenile Height MountingMounting frame to wall Do not overtighten Connecting supply and drain Connecting plastic tubing Completing installation Cleaning Cleaning and Maintenance InstructionsTerreon and panel maintenance Panel cleaningSoap Dispenser Maintenance Fill soap dispensersIf water just dribbles or does not flow from sprayhead Check Valve TroubleshootingCleaning Instructions If water sprayhead delivers all hot or cold waterOptional Stop/Strainer/Check Valve Assembly of ComponentsPaneling Other Replacement Parts Pushbutton assemblyMetering Air Valve Repair Kits and Parts List Metering Air Valve MaintenanceMetering Air Valve Troubleshooting Problem Water is dripping from the streamformersProblem Timing can not be adjusted for more than 5 seconds Problem Valve will not shut offProblem Valve will not turn on Problem Pushbutton does not work properlyService Suggestions Vernatherm Mixing Valve Maintenance and ServiceMaintenance Instructions

SS-2/AST/JUV, SS-2/AST/STD specifications

The Bradley Smoker SS-2/AST/STD and SS-2/AST/JUV models represent the pinnacle of modern smoking technology, designed to cater to both novice and seasoned smokers alike. These electric smokers are engineered to deliver a consistent and flavorful smoking experience, making them an essential addition to any outdoor cooking setup.

One of the standout features of the Bradley Smoker models is their innovative smoking system that utilizes a unique process called "smoke generating". These models come equipped with an automatic wood bisquette feeder, which automatically feeds bisquettes into the burner at regular intervals. This ensures that the user achieves a consistent smoke flavor without the hassle of manual refueling. The bisquettes are made from 100% natural wood and come in various flavors, offering users an array of smoking options from hickory to applewood.

Temperature control is another hallmark of the SS-2 models. They are designed with a digital control system that allows users to easily set the temperature and smoking time. The built-in thermostat provides precise heating, ensuring that food is cooked to perfection while infused with rich smoke flavor. The capability to adjust temperature allows for versatile cooking, whether users want to smoke fish, meat, or vegetables.

The stainless steel construction of these smokers not only enhances their durability but also makes them visually appealing. The interior is spacious, providing ample room for a variety of food items. The removable racks are adjustable, allowing users to customize the smoking space based on their specific needs.

Safety features are also a significant aspect of these models. They are designed with an automatic shutoff function that activates if the smoker gets too hot, providing peace of mind during cooking sessions. Furthermore, the insulated walls ensure that the exterior remains cool to the touch, reducing the risk of accidental burns.

Another key characteristic of the Bradley Smoker SS-2 series is their user-friendly design. Whether it's the easy-to-use digital controls or the straightforward assembly process, these smokers are designed to make smoking accessible to everyone.

In summary, the Bradley Smoker SS-2/AST/STD and SS-2/AST/JUV models combine advanced technology, user-friendly features, and durable construction, making them a top choice for those who are serious about their smoking. Whether for backyard barbecues or gourmet cooking, these electric smokers promise to elevate your culinary endeavors with rich, smoky flavors.
Top Page Image Contents