Express® Lavatory System SS-Series | |
SS-2/AST/STD, SS-2/AST/JUV | Installation Instructions - For Service Only |
Pre-Installation Information
Barrier-free and ADA compliant - standard height mounting
The SS-2/AST/STD Express® Lavatory System is compliant with Americans with Disabilities Act (ADA). When mounted at 34" rim height, the Express® meets ADA, ANSI and UFAS require- ments for barrier-free clearances, reaches and controls. Always check local codes and ordinances for compliance.
Barrier-free and ADA compliant - juvenile height mounting
The SS-2/AST/JUV Express® Lavatory System is compliant with Americans with Disabilities Act (ADA) Accessibility Guidelines for Buildings and Facilities: Building Elements Designed for Children's Use; Final Rule.
Pushbutton and air valve
Each sprayhead is controlled by a pushbutton air valve, enabling each user to activate a single flow of water. Air valves use 0.5 gpm for a ten-second duration, meeting the ANSI/ASHRAE/IES 90A-1980 Standard.
Supplies required for installation:
•(6) 3/8" wall anchors, bolts and washers to mount frame and bowl to wall (minimum pull-out rating of 1,000 lbs.)
•1/2" NPT hot and cold supply piping
•1-1/2" NPT drain piping
2 | 5/11/04 | Bradley Corporation • 215-1244 Rev. C; EN 03-813 |