Bradley Smoker S53-308, S53-307, 232-007 Installation Instructions Electronic Battery Box DC

Installation Instructions Aerada 1000 Series Gooseneck Faucet

Installation Instructions - Electronic Battery Box (DC)

Models S53-306 and S53-307

1	Install the baseplate and mount the electronic box to the	2	Remove the strain relief cover and screw (1) using hex
	desired wall location. The baseplate must be mounted either		key provided (2) . Remove foam gasket (3). Separate the
	level with or above solenoid valve, and within 12" of the		foam gasket at the perforation.
	solenoid valve.
NOTE: When positioning
the baseplate, make sure
there is enough room for			3
drip loops in the final
installation. Refer to Note
in step 6.
			1	2

3	Insert smaller foam gasket (3) into the strain relief. Install	4	Insert larger foam gasket (1). Attach strain relief cover (2)
	solenoid cable plug (1) into the smaller, telephone-style		and screw (3) using hex key provided (4).
	jack in the transformer. Install faucet sensor cable plug (2)
	into the larger RJ-45 jack.

3
2	1
1	2
	3
CAUTION: Faucet will automatically calibrate when	4
sensor cable is connected. DO NOT place
objects in front of collar sensor for first 30
seconds after power-up.

5	Mount the electronic box to the wall location using	6	CAUTION: DO NOT turn on water supply until all
	screw(1) and hex key provided (2).		electrical connections are made.
NOTE: To ensure the		Turn on the water supply.
electronic box is level		1
with or above the
solenoid valve, the cables		NOTE: When power is initially supplied, the LED on the
should create a drip loop		electronic box will blink and an audible indicator chirps twice per
The electronic box is		second whenever hand presence is detected. This will continue
designed with the wire		for 8 minutes and then stop.
connectors facing		2
downward to ensure
		Proceed to Faucet Operation, page 6.
proper drip loops.

Bradley Corporation • 215-1559 Rev. A; EN 04-216A 9/23/04 5