American Standard 1662 installation instructions Install Lower Support Bracket, Install Slide BAR

Page 2

2INSTALL LOWER SUPPORT BRACKET

The SLIDE BAR works best when secured to the wall studs or cross brace using the WOOD SCREWS. If a mounting into the studs is not possible, use appropriate wall fasteners to provide secure installation.

Mark a vertical center line in the location you wish to install the SLIDE BAR. NOTE: The height from the finished floor is optional. See rough-in drawing for suggested dimensions.

VERTICAL

C/L

Fig. A

1

HORZ.

 

C/L

Fig. B

 

OPTIONAL

 

TO FINISHED

 

Determine desired height from the finished floor to the lower support and mark a horizontal center line. Place the MOUNTING BRACKET (1) on the center lines, with a pencil mark the location on the mounting holes to be drilled. Fig. A.

Using 15/64" diameter drill. Drill two mounting holes 1" max. deep. Fig. B.

FLOOR

FINISHED

FLOOR

Install the two ANCHORS (2) provided into the mounting holes. (Use a hammer

2

1

to lightly tap ANCHORS (2) into place.) Make sure they are installed flush with

the finished wall.

 

Place the MOUNTING BRACKET (1) over the ANCHORS (2) and secure the

3

 

MOUNTING BRACKET (1) with the SCREWS (3) provided. Fig. C.

Fig. C

 

3

INSTALL SLIDE BAR

Fig. A

2

3

 

 

 

 

Slide the COVER (1) onto the MOUNTING BRACKET (2) flush

 

 

1

 

against the wall. Fig. A.

 

 

SLOT

 

 

 

 

Install the bottom of SLIDE BAR (3) into the MOUNTING BRACKET (2).

IMPORTANT: The slot at the bottom of the slide bar must face toward the2 wall. Rotate the slide bar until it locks into place and cannot be turned. Fig. B.

Fig. B

4LOCATE UPPER MOUNTING BRACKET

Install the upper MOUNTING BRACKET (1) onto the SLIDE BAR (2). Align the MOUNTING BRACKET (1) with center lines and mark the center mounting hole with a pencil as shown. Fig. A.

Remove the SLIDE BAR (2) and set a side.

Using 15/64" diameter drill bit, drill mounting hole 1" max. deep. Fig. B.

2

Fig. A

1

Fig. B

5INSTALL UPPER MOUNTING BRACKET

Install the ANCHOR (1) provided into the mounting hole. Make sure it is installed flush with the finished wall. (Use a hammer to lightly tap ANCHOR (1) into place.)

Place the MOUNTING BRACKET (2) over the ANCHOR (1) and secure the MOUNTING BRACKET (2) with the SCREW (3) provided.

NOTE: Do not tighten fully.

Slide the MOUNTING BRACKET (2) up against the bottom of the mounting slot..

Slide the COVER (4) onto the MOUNTING BRACKET (2) flush against the wall.

Fig. A

3

1

2 4

2

Fig. B

BOTTOM OF MOUNTING SLOT

M968637 Rev 1. 3

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Install Wall Supply Install Upper Mounting Bracket Install Lower Support BracketInstall Slide BAR Locate Upper Mounting BracketInstall Hose and Hand Shower Install Slide BAR Into Mounting BracketsFinish Installation Care Instructions

1662 specifications

The American Standard 1662 is a well-regarded toilet model known for its efficiency, comfort, and sleek design. This unit combines modern technology with classic functionality, making it a popular choice for homeowners and builders alike.

One of the standout features of the American Standard 1662 is its powerful flushing system, which utilizes a siphonic action that ensures a strong and reliable flush every time. This design not only enhances performance but also minimizes clogs, making it a practical solution for busy households. The toilet is equipped with a 1.6 gallons per flush (GPF) rating, helping to conserve water while maintaining performance, aligning with contemporary water conservation initiatives.

In terms of design, the American Standard 1662 boasts a compact, elongated bowl that offers added comfort and space for users. This ergonomic shape is favored for its personal comfort and accessibility, catering to individuals and families alike. The high-profile tank complements many bathroom decors, offering an attractive appearance without sacrificing functionality.

The toilet features a Fully Glazed Trapway, which aids in smooth waste removal and reduces the chances of blockages. This feature, in combination with the toilet's dual flush options, promotes efficient water use without compromising effectiveness. Users can choose between a light or full flush, depending on their needs, further enhancing water savings.

Installation is streamlined, thanks to the straightforward design and included components. The American Standard 1662's adjustable height makes it conducive for a variety of bathroom conditions, allowing for an easy fit into both standard and handicap-accessible settings.

Durability is another important characteristic of the American Standard 1662. Constructed from high-quality vitreous china, it resists stains and scratches, ensuring the toilet will maintain its pristine appearance over time. Moreover, this model comes with a limited warranty, giving users peace of mind regarding its longevity and performance.

In summary, the American Standard 1662 is an ideal toilet merging efficiency, comfort, and aesthetics. With its robust flushing technology, eco-friendly features, and enduring design, it remains a top choice for those looking to upgrade their bathroom fixtures while keeping sustainability in mind. Whether for new construction or a bathroom remodel, the American Standard 1662 delivers on all fronts.
Top Page Image Contents