Thermador CIS365 installation instructions Test the installation

Electrical connection		CAUTION:cBefore installing, turn off at the service panel. Lock service
	￿panel to		prevent power from being turned on accidentally.
	The	branch-circuit breaker ampacity, the wire sizes and the connections must m
	the	requirements	of	the National Electrical Code (or Canadian Electrical Code) a
	all	local codes	and	ordinances.

Attach flexible conduit to the junction box.

￿WARNING:c To reduce the risk of electric shock and fire, do not use flexible power supply cord.

Connect the cooktop lead wires to the junction box supply wires in the followi order:

black	(L1)	to	black
red (L2) to		red
green	wire	to	ground
			Red wire	House	power	supply
				cord
					Black	wire
	Certified	UL			Junction
	connector
					box
			Grounded green	Cooktop	power	supply
			cable	cord

If the cooktop is installed and connected as specified above, it will be comple grounded in compliance with the National Electrical Code.

Test the installation	CAUTION:cBefore plugging in the electrical cord, be sure all controls are
	￿the OFF position.
	Remove everything from the cooktop surface, including stickers.
	Clean cooktop surface with cooktop cleaning cream.
	Turn on the power supply.
	Verify that elements function properly.

12