Preparation
Countertop requirements | WARNING:cTo reduce the risk of ignition of nearby combustible materials |
| install the countertop with a minimum distance of 2" (51mm) from both |
| walls and the back wall. |
Note | The work surface should be horizontal and level. The stability of the countertop |
| should be confirmed even after making the cutout. |
| After preparing cutout, remove shavings as they can affect the function of elect |
| components. |
| Seal the surfaces of the cutout to make them heat resistant. This prevents the |
| surfaces from expanding as a result of humidity. |
| Solid surface countertops often require special installation. For example, heat |
| reflective tape or rounded corners may be necessary. Contact the countertop |
| manufacturer for instructions specific to your countertop. |
30" Models: CIT304...
6
