5.0 System Setup
5.4 Stereo Select Mode settings
Here is an overview of common steps to follow in setting up the Stereo Select Mode:
A. Choose this mode.
B. Set up inputs.
C. Set up outputs.
D. Choose EQ settings.
E. Set up Page Input, if applicable.
F. Set up Direct Input, if applicable.
Setup menus unfold as you move right to the options provided, as shown.
5.4.1 Remember: for adjustments, use three steps
•For various adjustments (designated by Adj), use these steps:
1.Press SELECT to activate the Adj field.
2.Using the up or down arrow, adjust the value.
3.Press SELECT to confirm the setting and move on.
•For level changes (designated by Lvl), use front panel controls as shown.
• To change Input Vol Lvl, use:
• To change Output Vol Lvl, use:
•To change Output Bass Lvl and Output Treb Lvl, use a screwdriver to turn:
• To change Page Vol Lvl, use:
A
Choose Stereo Select Mode
Press SELECT (
) to confirm the mode selection.
An asterisk (*) marks the selection made.
B
next page
C
next page
D
page 24
E
page 24
F
page 25
22 of 36