Mitsubishi Electronics MSY-A24NA FEEL... Auto Operation, To start operation, To stop operation

TOO

COOL

TOO

WARM

I FEEL... AUTO OPERATION

With the “ (I FEEL...)” auto operation mode, the optimum room condition can be set automatically with a one-touch operation.

To start operation:

■ Press the	ON/OFF
	button.

When the “ (I FEEL...)” mode is selected, the air conditioner is automatically controlled at the optimum temperature.

To stop operation:

■ Press the	ON/OFF
	button.

If you feel slightly warm:

■ Press the button to lower the temperature.

One press lowers the temperature by about 2°F.

If you feel slightly cool:

■ Press the button to raise the temperature.

One press raises the temperature by about 2°F.

When “ (I FEEL...)” is not selected, press the MODE button until it is set.

Each time the button is pressed, the operation mode is changed

in sequence: (I FEEL...) → (COOL) → (DRY) → (FAN)

Description of “AUTO RESTART FUNCTION”

•These units are equipped with an auto restart function. When the main power is turned on, the air conditioner will start operation automatically in the same mode as the one set with the remote controller before the shutoff of the main power.

•If the unit was set to off with the remote controller before the shutoff of the main power, it will remain stopped even after the main power is turned on.

•If the unit was in the emergency operation before the shutoff of the main power, it will start operation, when main power comes on, in the same mode as the one set with the remote controller before the emergency operation.

•If the unit is operated in “I FEEL…” mode before power failure, the operation mode (COOL or DRY) is not stored in the memory. When the main power is turned on, the unit decides the operation mode by the initial room temperature at restart and starts operation again.

6