Description of “I FEEL...” mode
Details of operation
According to the room temperature when the operation starts, the operation mode is automatically set to COOL, DRY. However, when operation is started again within 2 hours after it is stopped, the same operation mode before the operation is stopped is selected. The operation mode selected first is not changed even if the room temperature changes. If the operation mode does not match the room condition, select the appropriate operation mode by pressing the MODE button.
Details of auto operation
Room temperature when started | Operation mode | Target temperature (initial state) |
|
|
|
About 77°F or higher | COOL | About 75°F |
|
|
|
About 77°F or lower | DRY | — |
|
|
|
NOTE:
COOL: When the room temperature is 4°F higher than the set temperature, the set temperature may not be changed since the air conditioner is operating to reach the target (set) temperature. In this case, please wait until the room temperature drops to within 4°F of the set temperature and then change the set temperature.