Mitsubishi Electronics MSY-A24NA How to set the batteries and the current time, Current time

Page 9

PREPARATION BEFORE OPERATION

Remote controller

How to set the batteries and the current time

1Remove the front lid and insert batteries. Then reattach the front lid.

Insert the minus pole of the batteries first. Check if the polarity of the batteries is correct.

Insert the minus pole of the batteries first.

2Press the RESET button.

Press using a thin stick.

•If the RESET button is not pressed, the remote con- troller may not operate correctly.

3Press the CLOCK set button.

Press using a thin stick.

4Press the (Forward) and (Back- ward) buttons (TIME SET buttons) to set the

current time.

•Each time the button is pressed, the set time

increases by 1 minute, and each time the but- ton is pressed, the set time decreases by 1 minute.

•Pressing those buttons longer increases/decreases the set time by 10 minutes.

5Press the CLOCK set button again and close the front lid.

Handling of the remote controller

•The range that the signal can reach is about 20 ft. when the remote controller is pointed at the front of the indoor unit.

•When a button is pressed, one or two beeps will be heard from the indoor unit. If no sound is heard, operate again.

•Use the remote controller carefully.

If it is dropped, thrown or it gets wet, the remote control- ler may not operate.

•Since the display on the remote controller is made of liquid crystal (glass), it may not light up if it is damaged from falling.

•Refer to page 12 when the indoor unit does not respond to the remote control signal.

When installing on a wall, etc.

•Install the remote controller holder in a position where the signal reception sound (beep) can be heard from the indoor unit when the ON/OFF button is pressed.

How to install/remove the remote controller

Installing :Insert the remote controller downward. Removing :Pull it up.

Remote control- ler holder

Dry-cell batteries

■Reference for replacing batteries

Replace the batteries with new AAA alkaline batteries in the following cases:

·When the indoor unit does not respond to the remote control signal.

·When the display on the remote controller becomes dim.

·When a button of the remote controller is pressed, all displays appear on the screen, and then disappear im-

mediately.

Do not use manganese batteries. The remote controller could malfunction.

•The service life of an alkaline battery is about 1 year. However, a battery whose time limit is approaching may be exhausted soon.The recommended usable time limit is indicated (month/year) on the bottom of the battery.

•To prevent liquid leakage, take out all batteries when the remote controller is not going to be used for a long time.

CAUTION:

If liquid from the batteries gets onto your skin or clothes, wash it well with clean water.

If liquid from the batteries gets into your eyes, wash them well with clean water and consult a doctor at once.

•Do not use rechargeable batteries.

•Replace the 2 batteries with new ones of the same type.

•Dispose of exhausted batteries in the correct manner.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operating Instructions Manual DE Instrucciones Índice ContentsSafety Precautions Do not pull the power supply cord Do not scratch or process the power supply cord, etcDo not turn the breaker off/on during operation Do not put a vase or glass on the indoor unitFor installation Name of Each Part Indoor unitOutdoor unit Open the front lid Remote controllerAuto restart function Preparation Before OperationBreaker for the air conditioner Turn the breaker onPress the Reset button How to set the batteries and the current timePress the Clock set button Current timeCase of Emergency Cool Mode Emergency Operation switch twiceEach time the Emergency Operation switch is Pressed, the unit will operate in order of EmerTo start operation FEEL... Auto OperationTo stop operation Description of Auto Restart FunctionDescription of I FEEL... mode Details of operationDetails of auto operation Select the operation mode by pressing the Mode button To select the COOL, DRY or FAN modeWhen the set temperature is to be changed Manual Operation COOL, DRY, FANAIR Flow Velocity and Direction Adjustment Auto air flow direction control operationHorizontal AIR Flow blowing range Powerful mode Powerful OperationPress the button Operation Vane button is availableEcono Cool Operation What is Econo COOL?To release the Econo Cool operation Press the Econo Cool buttonHow to set the on timer How to set the OFF timer Timer Operation ON/OFF TimerTo release the on timer To release the OFF timerWhen the air conditioner is to be used again When it is not going to be used for a long timeClean the air filter and install it in the indoor unit Turn off the breakerBefore starting maintenance MaintenanceCleaning the indoor unit Clean the unit using a soft dry clothCleaning the air filter about once every 2 weeks Cleaning the AIR Filter CatechinInstall the air filter What is Catechin air filter?Air cleaning filter replacement About once every year Replacement of the AIR Cleaning FilterRemove the air cleaning filter blue bellows type Install the air filter and securely close the front panelCleaning the air cleaning filter about once every 3 months Cleaning the AIR Cleaning FilterWhen a power failure oc Mote control signalQuestion Check points or Remedy Air conditioner cannot Be operatedHink That Trouble has Occurred INSTALLATION, Relocation and Inspection Installation placeElectrical work Operating sound considerations Inspection and maintenanceRelocation DisposalSpecifications are subject to change without notice
Related manuals
Manual 48 pages 59.2 Kb Manual 48 pages 11.54 Kb

MSY-A24NA specifications

Mitsubishi Electronics is a renowned name in the HVAC (heating, ventilation, and air conditioning) industry, known for innovative, efficient air conditioning solutions. The MSY-A17NA, MSY-A24NA, MSZ-A15NA, MSZ-A24NA, and MSZ-A12NA models exemplify this legacy, offering advanced features and cutting-edge technology. These models cater to various room sizes and requirements, providing comfortable and reliable climate control.

The MSY-A series, including the MSY-A17NA and MSY-A24NA, is designed for both cooling and heating. They feature inverter technology, which optimizes energy use by adjusting compressor speed based on demand, resulting in significant energy savings. The units come equipped with high-performance filters that capture dust and allergens, ensuring cleaner air.

Additionally, the MSY models incorporate a quiet operation mode, making them ideal for residential use. The user-friendly remote control allows for easy adjustments, while the programmable timer adds convenience for scheduling operation times to align with the user's lifestyle. Both models are built with durability in mind, featuring rust-resistant cabinets and high-quality components that extend the lifespan of the unit.

On the other hand, the MSZ-A models, which include the MSZ-A15NA, MSZ-A24NA, and MSZ-A12NA, are wall-mounted indoor units that complement the MSY outdoor models. With their sleek design, they blend seamlessly into any interior decor. The MSZ-A units also utilize inverter technology, enhancing energy efficiency and providing fast cooling and heating performance.

One notable feature of the MSZ-A series is the advanced air purification system, which goes beyond standard filtration. It includes technologies that neutralize odors and harmful gases, creating a healthier indoor environment. The models also come with a quiet operation mode, making them suitable for bedrooms and other quiet spaces.

All Mitsubishi MSY and MSZ models have been built with proactive environmental considerations, complying with high energy efficiency standards. They contribute to lower electricity bills and reduced carbon footprints. Furthermore, their compact design ensures easy installation in various settings without sacrificing performance.

In summary, Mitsubishi Electronics' MSY-A17NA, MSY-A24NA, MSZ-A15NA, MSZ-A24NA, and MSZ-A12NA models stand out in the competitive HVAC market. With features like inverter technology, advanced air purification, and user-friendly controls, these air conditioners deliver outstanding performance, comfort, and reliability while promoting energy efficiency and sustainability.
Top Page Image Contents