Mitsubishi Electronics MSY-A24NA manual When it is not going to be used for a long time

Page 18

WHEN THE AIR CONDITIONER IS NOT GOING TO BE USED FOR A LONG TIME

When it is not going to be used for a long time:

1Perform the FAN operation for 3 or 4 hours to dry the inside of the air conditioner.

To perform FAN operation, set the remote controller to the highest temperature in the MANUAL COOL mode. (Refer to page 7.)

2Turn off the breaker.

CAUTION:

Turn off the breaker when the air conditioner is not go- ing to be used for a long time.

Dirt may collect and this may cause a fire.

3Remove the batteries from the remote con- troller.

CAUTION:

To prevent liquid leakage, take out all batteries when the remote controller is not going to be used for a long time.

When the air conditioner is to be used again:

1Clean the air filter and install it in the indoor unit.

(Refer to page 10 for cleaning instructions.)

2Check that the air inlet and outlet of the in- door/outdoor units are not blocked with any obstacles.

3Check that the ground is connected correctly.

CAUTION: Ground the unit.

Do not connect the ground to a gas pipe, water pipe, light- ning rod or the ground of a telephone. If the grounding is incorrect, it may cause an electric shock.

9

Image 18
Contents Operating Instructions Manual DE Instrucciones Contents ÍndiceSafety Precautions Do not turn the breaker off/on during operation Do not scratch or process the power supply cord, etcDo not pull the power supply cord Do not put a vase or glass on the indoor unitFor installation Name of Each Part Indoor unitOutdoor unit Remote controller Open the front lidBreaker for the air conditioner Preparation Before OperationAuto restart function Turn the breaker onPress the Clock set button How to set the batteries and the current timePress the Reset button Current timeEach time the Emergency Operation switch is Emergency Operation switch twiceCase of Emergency Cool Mode Pressed, the unit will operate in order of EmerTo stop operation FEEL... Auto OperationTo start operation Description of Auto Restart FunctionDescription of I FEEL... mode Details of operationDetails of auto operation When the set temperature is to be changed To select the COOL, DRY or FAN modeSelect the operation mode by pressing the Mode button Manual Operation COOL, DRY, FANAIR Flow Velocity and Direction Adjustment Auto air flow direction control operationHorizontal AIR Flow blowing range Press the button Powerful Operation Powerful mode Operation Vane button is availableTo release the Econo Cool operation What is Econo COOL?Econo Cool Operation Press the Econo Cool buttonTo release the on timer Timer Operation ON/OFF TimerHow to set the on timer How to set the OFF timer To release the OFF timerClean the air filter and install it in the indoor unit When it is not going to be used for a long timeWhen the air conditioner is to be used again Turn off the breakerCleaning the indoor unit MaintenanceBefore starting maintenance Clean the unit using a soft dry clothInstall the air filter Cleaning the AIR Filter CatechinCleaning the air filter about once every 2 weeks What is Catechin air filter?Remove the air cleaning filter blue bellows type Replacement of the AIR Cleaning FilterAir cleaning filter replacement About once every year Install the air filter and securely close the front panelCleaning the AIR Cleaning Filter Cleaning the air cleaning filter about once every 3 monthsQuestion Check points or Remedy Air conditioner cannot Mote control signalWhen a power failure oc Be operatedHink That Trouble has Occurred INSTALLATION, Relocation and Inspection Installation placeElectrical work Relocation Inspection and maintenanceOperating sound considerations DisposalSpecifications are subject to change without notice
Related manuals
Manual 48 pages 59.2 Kb Manual 48 pages 11.54 Kb