Removing, Installing, and Replacing Components
10Connect the second power connector to the new drive.
Second power connector
Second drive connector
43
KY0085.VSD
11Make sure the drive connector is connected securely to the motherboard.
12Lower the drive holder down and slide it back into the chassis (A in next diagram). Be sure to align all four slots on the drive holder with the tabs on top of the chassis.
13Slide the drive holder back so that the tabs slip into the notches.
B
B
B
B
A
KY0086.VSD
14Replace the four screws (B) that secure the drive holder to the chassis.
15Replace the cover (see “Replacing the Cover” on page 26).