Sony PCV-R532DS manual USB Connectors, Pin Signal Name, USBVCC2, USBP1

Page 68

60

VAIO Digital Studio Reference Manual

USB Connectors

There are two USB ports that permit connection of two USB peripheral devices directly to the system without having to use an external hub.

USB2 is a standard USB connector accessible from the rear panel. USBHEAD is a 4-pin single-line header that connects to a standard USB connector (USB1) accessible at the bottom of the front panel. An internal cable connects USBHEAD to an interface board behind the front panel.

If more USB devices are needed, connect an external hub to either USB1 or USB2.

USBHEAD

(connects to USB1 on front panel)

USB2

KY0033.VSD

USBHEAD (connects to USB1 on front panel)

Pin Signal Name

1USBVCC2

2USBP1#

3USBP1

4Ground

Image 68

Contents Page Safety Information Owner’s RecordRegulatory Information FCC Part Telephone Consumer Protection ActContents Removing, Installing, and Replacing Components Vaio Digital Studio Reference ManualFax/Modem Card Link Card Cmos Setup Options Viii Chapter Identifying Components Front View Drives Drive DescriptionButtons and Switches Button or switch DescriptionIndicators Indicator DescriptionUSB ConnectorsConnector Description Rear View Icons IconDescriptionTelephone for phone Link IEEE-1394 Keyboard and Mouse USB ConnectorsSerial Connector Printer Connector Vaio Digital Studio Reference Manual Game Connector MIC, Line IN, and HeadphonesHeadphones MICLink IEEE-1394 Connectors Telephone and LineExpansion Slots Chapter Configuring Your System Accessing the Bios Setup Utility Changing the Displays Power Management Settings Click SettingsVaio Digital Studio Reference Manual Configuring the System Board Page Chapter Removing, Installing, Replacing Components Removing the Cover Removing, Installing, and Replacing Components Removing the Front Panel Replacing the Front Panel Replacing the Cover Gently press the frame in until it clicks into position Installing an Add-In Card Removing an Add-in Card Vaio Digital Studio Reference Manual Replacing the Lithium Battery KY0072.VSD Removing, Installing, and Replacing Components Installing System Memory Memory module configurations MBDIMM2 DIMM1 Vaio Digital Studio Reference Manual Removing a Memory Module Push out Removing a Slot Cover Covering an Open I/O Slot Installing a 3½ Internal Hard Disk Drive Slide the drive holder forward B, and then out Connect the second power connector to the new drive Vaio Digital Studio Reference Manual Installing a 5¼ Internal Hard Disk Drive Drive bay Drive bay cover KY0095.VSD Removing the Power Supply KY0097.VSD KY0098.VSD Replacing the Power Supply Page Chapter System Board USB1Name Description ConnectorsFront Panel Header J25 Diskette Drive Connector Memory Module Dimm Connectors PCI Slot Connectors IDE Connectors Power ConnectorKeyboard and Mouse Connectors PinData Logic GND ClockUSB Connectors Pin Signal NameUSBVCC2 USBP1USBP0 Serial 1, PRINTER, and Monitor ConnectorsUSBVCC1 DCD RXD TXD DTR Logic GND DSR RTS CTS Strobe Data BITBusy Select AUTO-FEEDRED Green Blue GND DDC GND RED GND Green GND Horizontal Sync Vertical SyncFan Connectors FansenGame Connector Gamevcc JPYB0 JOYA0 GND JOYA1 JOYA2HEADPHONES, Line IN, MIC Connectors CD-IN Connector Modem Connector AUX-IN Connector Configuration Jumper Telephone Name Connector Type DescriptionChapter Fax/Modem Card Page Link Card Page Chapter Cmos Setup Options Vaio Computer Reference Manual Main Screen CD-ROM LBAAdvanced Screen HighMute LOWUswc 2F8H/IRQ3 3E8H/IRQ43BCH/IRQ7 EPPSymbios Scsi Bios Cmos Setup Options Page Power Screen Dpms OFFVaio Computer Reference Manual Atapi MO Boot ScreenAtapi CD-ROM Exit Screen Chapter Miscellaneous Technical Information About User and Supervisor Passwords If you set these passwords Following passwords are requiredBeep Code Error Messages PCI Configuration Status and Error Messages Message MeaningMiscellaneous Technical Information Channel Default AssignmentDMA Channel Assignments System I/O Address Map Address Range Description HexVaio Computer Reference Manual Address Range Description Hex Address range Default configuration Memory MapIRQ Settings SettingsChapter Specifications ProcessorChipset PCI BusGraphics Dimm ConfigurationsL2 Cache Expansion Slots AudioCommunications ROM System BiosDrives and Controllers Index 104 IDE105 PCI106 Mouse