Kompernass KH 1028 Intended use, Technical Data, Items supplied Safety information

STAINLESS STEEL

ELECTRIC KETTLE

KH 1028

Read these operating instructions carefully before using the appliance for the first time and preserve this maual for later reference. Pass this manual on to whoever might acquire the appliance at a future date.

Intended use

This appliance is intended for the boiling-up of water in domestic households. It is not intended for use with other liquids or for commercial applications.

Technical Data

Voltage:	220 - 240 V ~ / 50 Hz
Power consumption: 2500 - 3000 W
Volume:	max. 1.5 l
	min. 0.5 l

￿In older electrical installations, the building fuse (12A) may be triggered due to the high power consumption.

•Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department.

•Always remove the plug from the power socket after use. Simply switching the appliance off is not sufficient, as the appliance is under power for as long as the plug is connected to the socket.

￿To avoid burns and other injuries:

•Always heat water with the lid closed, otherwise the automatic cut-out may not function. Boiling water could then spray out over the rim.

•Hot steam clouds may be released. The boiler also becomes very hot during operation. Wear oven mitts.

•Ensure that the appliance is standing securely and vertically before switching it on. Boiling water can cause an unstable kettle to fall over.

•This appliance is not intended for use by individuals (including children) with restricted physical, physio- logical or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used.

•Children should be supervised to ensure that they do not play with the appliance.

Items supplied

Safety information

￿To avoid potentially fatal injury through electric shock:

Water boiler Base

Operating instructions

•Ensure that the base with the electrical connections does not come into contact with water! If it has unintentionally come into contact with water, first allow it to dry out completely before taking it into use.

•Only use the water boiler with the supplied base.

•Ensure that the power cable never becomes wet or damp during operation. Lay the cable so that it cannot be trapped or otherwise damaged.

- 1 -