Electrolux PE 8036-M Reset of Standard Values, Regulation of the Ground Coffee

Page 13

comes out (repeat this operation as many times as necessary) and then set the knob to the off position (B-18).

￿￿Meanwhile the water temperature

indicator

lights

up

(B-26). It

indicates

the

water

heating

process in the boiler. When the light goes out it means that the machine has reached the right temperature and is ready for coffee.

RESET OF STANDARD VALUES

￿￿The coffee machine leaves the factory set for the ideal Italian espresso coffee, as approved by the coffee University of Naples and in accordance with ILLY standard. The setting values for long coffee, on the contrary, are in accordance with German standards.

￿￿If you wish to reset these standard values, just turn the machine on by pushing the ON/OFF button (B-20) and the steam button (B-23) at the same time. The flashing indicator lights show that the standard values have been reset.

REGULATION OF THE GROUND

COFFEE

￿￿The coffee machine leaves the factory already set on an ideal coffee grinding level.

￿￿Push the cabinet locking button (E/1).

￿￿Take the coffee machine out of the housing using the special telescopic runners (E/2).

￿￿The grinding level can be changed using the special regulation knob (A-10). By turning the knob in a clockwise direction the grinding becomes fine and the coffee stronger. By turning the knob

anti-clockwise the grinding becomes coarse and the coffee lighter.

￿￿Push the coffee machine back into the housing (F/1), using the special telescopic runners.

￿￿Push the cabinet locking button (F/2) again so that the machine is secure.

PROGRAMMING OF THE GROUND

COFFEE MEASURE

￿￿The coffee machine leaves the factory already set to dispense the ideal measure for 1 cup of espresso.

￿￿The ground coffee measure can be increased or reduced and once selected, the machine can be programmed to remember this measure. The ground measure that can be programmed only refers to one single cup of coffee. Grinding time for double coffee comes out automatically after having memorised a single coffee.

￿￿Set the coffee measuring knob (B- 19) on the “small cup” light on the left (B-31), insert the 1-cup-filter- holder (A-11 / A-12) under the special funnel (A-5) and gently push and hold the grinder button to make the grinder work (A-4). After 10 seconds the grinder will start working and it is possible to

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PE 8036-M Page Page Page Page Page Page Page Page Description of the Coffee Machine FIG. a Description of the Control Panel FIG. BRecommendations OperatingHOW to Respect Environment For Installation ServicingFill UP the Water Reservoir Instructions for the First USEFill UP the Coffee Beans Container Starting ProcessRegulation of the Ground Coffee Reset of Standard ValuesProgramming of the Ground Coffee Measure Drawer Optional AccessoriesProgramming the Amount Coffee to be Dispensed Programming the Amount Water to be DispensedUSE of Coffee CoffeeUSE of Coffee Pods E System HOT Water HOW to Prepare AN Excellent EspressoSteam Heating LiquidsRecipes HOW to Prepare Cappuccino FoamItalian Cappuccino Viennese CappuccinoCleaning and Servicing Boiler Cleaning Cycle InstallationInstalling the Machine Into Furniture Housing Water ReservoirInstallation Without Support Components for InstallationElectrical Connection USE of the Side PlatesWhat to do IF… Installation with SupportWater Connection Fuses Technical SpecificationsService & Spare Parts Declaration of Guarantee TermsCustomer Care European Guarantee Guarantee ConditionsPage Page Page Page Page Vertical Adjustment Adjustment of the Front PanelDescription of the Coffee Drawer Picture a Fixing the Front Panel Horizontal AdjustmentAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents