Electrolux PE 8036-M installation instructions USE of Coffee Pods E System

Page 15

PES 8036-m. The drawer has a lot of useful compartments:

-One large compartment for cups and saucers

-A basin for coffee-grounds

-A compartment for all accessories (filters, measure).

-A tray

7. COFFEE

USE OF COFFEE

￿￿Set the coffee knob (B-19) to the required coffee measure.

￿￿Insert the filter-holder (A-11) under the Coffee measuring device (A-5). By pressing the relative button (A-4), the previously programmed coffee measure for one or two cups will automatically come out. Once the required measure has been dispensed, press the ground coffee with the pressing tool (A-

3).

￿￿Insert the filter-holder (A-11) correctly into the ring nut (A-5) making sure that it is perfectly secure: turn the filter-holder handle from left to right.

￿￿Put one/two coffee cup/s under the filter-holder nozzle (A-15/16).

￿￿Check that the red light of the water temperature indicator (B-

26)is out or wait until it goes out.

￿￿Push the coffee button (B-21) and the coffee measure dispensed will be exactly the same as the one selected and programmed.

￿￿Take the filter-holder out of the ring nut and remove the ground coffee.

USE OF COFFEE PODS

(E.S.E SYSTEM)

￿￿E.S.E. system means Easy Serving Espresso and corresponds to the international standard for brewing coffee using coffee pods (one throwaway portion of roasted coffee) and a suitable coffee machine. The E.S.E. system is easy, practical and ecological because it doesn’t need particular servicing and it is environmentally friendly. Moreover it is also a hygienic way to drink coffee thanks to its special packaging that avoids coffee coming out and it can be easily removed after use.

￿￿The machine can work also with pods: one throwaway portion of roasted coffee (for one single coffee only).

￿￿Turn the knob (B-19) to the required coffee measure (long or short single coffee) and the corresponding light will illuminate.

￿￿Insert the one throwaway pod into the filter-holder (use the 1- cup-filter)

￿￿Insert the filter-holder (A-11) correctly into the ring nut (A-5) making sure that it is perfectly secure: turn the filter-holder handle from left to right.

￿￿Put the cup under the 1-way nozzle (A-15).

￿￿Check that the red light of the water temperature indicator (B-

26)is out or wait until it goes out.

￿￿Push the coffee button (B-21) and the coffee will be dispensed.

￿￿Take the filter-holder out of the ring nut and remove the pod.

15

Image 15
Contents PE 8036-M Page Page Page Page Page Page Page Page Operating Description of the Control Panel FIG. BDescription of the Coffee Machine FIG. a RecommendationsHOW to Respect Environment For Installation ServicingStarting Process Instructions for the First USEFill UP the Water Reservoir Fill UP the Coffee Beans ContainerReset of Standard Values Regulation of the Ground CoffeeProgramming of the Ground Coffee Measure Programming the Amount Water to be Dispensed AccessoriesDrawer Optional Programming the Amount Coffee to be DispensedCoffee USE of CoffeeUSE of Coffee Pods E System Heating Liquids HOW to Prepare AN Excellent EspressoHOT Water SteamViennese Cappuccino HOW to Prepare Cappuccino FoamRecipes Italian CappuccinoCleaning and Servicing Water Reservoir InstallationBoiler Cleaning Cycle Installing the Machine Into Furniture HousingUSE of the Side Plates Components for InstallationInstallation Without Support Electrical ConnectionInstallation with Support What to do IF…Water Connection Fuses Technical SpecificationsDeclaration of Guarantee Terms Service & Spare PartsCustomer Care European Guarantee Guarantee ConditionsPage Page Page Page Page Adjustment of the Front Panel Vertical AdjustmentDescription of the Coffee Drawer Picture a Fixing the Front Panel Horizontal AdjustmentAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG