Every month wash the filter and filter holder in the dishwasher.
The steam nozzle
Attention: Before cleaning the steam pipe, always turn the machine off and wait at least 20 minutes after use to allow the steam pipe to cool. This will avoid the risk of burns.
WATER RESERVOIR
If the machine is not be used for long periods, change the water in the reservoir and empty the boiler by pushing the coffee button (B- 21) as many times as necessary.
Periodically clean the water
The water reservoir can be washed in a dishwasher.
The Brita filter should be replaced after approximately 2000 cups of coffee or at least after six months.
BOILER CLEANING CYCLE
Like all the appliances that use water, it is possible that fur will appear in the boiler of the coffee machine.
Every six months the following process should be carried out:
-Fill up the water reservoir with 1,5 litres of water also adding half a glass of vinegar or citric acid.
-Dispense some coffee (see paragraph 6. Coffee), but without using either ground coffee or
pods, so that only water will come out of the filter holder until the reservoir is completely empty.
-Fill the reservoir again with cool clean water and repeat the above process (without using coffee as before) in order to rinse the boiler.
-The coffee machine is now ready for use.
12. INSTALLATION
INSTALLING THE MACHINE INTO
FURNITURE HOUSING
For the machine to operate correctly, it must be installed into a suitable housing unit.
In conformity with safety norms, the protection to avoid contacts with the electrical parts and the parts protected only with functional insulation should be guaranteed by a correct insertion of the appliance.
All components that guarantee protection, even a cover panel (if the appliance for example is situated at
one extremity of the modular furniture), should be well fastened so that they can not be removed without using tools.
The appliance should be installed at a certain distance from refrigerator or freezer, because the heat given out from it can impair their functioning.
19