18 | Care and cleaning |
|
Care and cleaning
The frequency of cleaning depends on the amount and type of cooking.
Do not use the ventilating system without the
Always unplug or disconnect the appliance from the power supply before servicing.
attempting to clean any part of the appliance.
Lights
Before replacing the lamps, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.
NOTE: Turn off the lights and fan. Allow the lights to cool before handling. Replace lights per instructions. If new lights do not operate, be sure lights are inserted correctly before calling service.
Replace Lights
•Remove the inner lamp lens cover by inserting a
slots and gently prying it free.
NOTE: Do not remove the outer trim ring (lamp assembly).
Filters
aluminum and are long lasting.
To Remove The Metal Grease Filters
•Turn the fan and lights off.
•Pull the spring release handle.
Inner ring
Outer ring
To Replace The Metal Grease Filters
•Reverse procedure.
To Clean Filters
•
least once a month; they can be washed by hand or in the dishwasher.
•
dry thoroughly before replacing it.
The glass lens and inner trim ring are 2 pieces loose tting. Be careful when removing the trim ring that the glass lens does not fall out.
•Grasp the bulb and pull it straight out from the lamp socket.
•Replace with 120 volt, 40 watt halogen bulbs with a G9 base SUITABLE FOR USE IN OPEN LUMINAIRES.
Follow package directions, wear gloves, do not touch bulb with your bare ngers.
Bulb • Replace inner cover by inserting the three
retaining tabs into the three slots and pressing them rmly in place.
NOTE: Once you have replaced the light bulb, make sure to put back the glass in its place.