Electrolux 5995421657 manual Site Preparation

8Site Preparation

CABINET

OR WALL

DOOR

SWING

0"

CLEARANCE

NEEDED

UL124A

Figure 1

2 - 3/4”

Figure 2

NOTE

All units require zero clearance when installed flush with a cabinet or wall (see Figure 1). Electrolux stainless steel models require a minimum 2-3/4 inch handle clearance when installed against a wall or cabinet that extends beyond the front edge of the unit (see Figure 2).

5Position the unit to allow free air flow through the front grille (see Figure 3).

6Wipe out inside of unit with a damp cloth.

7Final finish of the wooden wine rack trim must be applied at least 24 hours before re- installing the wooden rack trim into the cabinet.

8Be sure to install the Anti-Tip brackets. Follow the instructions provided with the Anti-Tip bracket kit.

INTAKE	EXHAUST
	Figure 3