INSTALLATION
Mains Cable
Do not remove the power cord by pulling on its lead, particulary when the product is being pulled out of its niche.
·Damage to the cord may cause a
·In the event of damage to the appliance's main cable, only an authorised service company recommended by the manufacturer or a similarly qualified person may adjust it in order to avoid shock hazard for the user.
Unpacking
Unpack the cabinet and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Hand the packaging over for recycling. For more information, contact your local council or the dealer.
Do not allow children to play with the packaging. The plastic film can cause suffocation.
Remove the transport supports
Remove the tape and the transport supports from
·the door sides
·inside the door hinges
·the shelves
Remove the transport support on the glass shelf by pushing the support forward along the edge of the shelf until it stops. Take hold of the rear edge of the glass shelf and pull the shelf and transport support forward
until the shelf tilts and the transport support can be removed. Some models are fitted with a silencing pad under the cabinet. Do not remove this pad.
Installation of distance
Assemble the attached distance on the back side of the panel according to the illustration.
19