Electrolux ERF37800WX Cleaning, To obtain the best performance from the cabinet, ensure

Cleaning

Wash the inside of the cabinet using lukewarm water, a mild washing-up detergent and a soft cloth.

Installing the cabinet

Make sure that the power plug is not squashed or damaged by the back of the product.

·A damaged power plug may overheat and cause a fire.

Do not place heavy articles or the product itself on the power cord.

·there is a risk of a short circuit and fire.

If the power plug socket is loose, do not insert the power plug.

·there is a risk of electric shock or fire.

To obtain the best performance from the cabinet, ensure:

·the cabinet is placed in a dry, cool place and is not exposed to direct sunlight.

·the cabinet is not placed close to a source of heat, e.g. a cooker or dishwasher.

·the cabinet is level. The cabinet should not lean against any wall. If necessary adjust the feet using the adjustment spanner supplied.

·there is good air circulation around the cabinet and that the air channels below and behind the cabinet are not

blocked. The ventilation space above the cabinet must be at least 4 cm. The ventilation space can either be

a)directly above the cabinet, or

b)behind and above the top cupboard. In this case, the space behind the cupboard must be at least 50 mm deep.

a)b) 50mm

Cabinet is placed at a location where the ambient temperature corresponds to the climate classification*, for which the appliance is designed.

*See on the rating plate on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification.

Climate	for an ambient
classifi-	temperature of
cation
SN	+10°C to +32°C

N+16°C to +32°C

ST +18°C to +38°C

T+18°C to +43°C

20