Make Electrical Connections, Ground Wiring

12 Make Electrical Connections

3.Use UL listed wire connectors and connect the black wires (C) together.

4.Use UL listed wire connectors and connect the white wires (D) together.

5.Use UL listed wire connectors and connect the red wires (E) together.

6.Use UL listed wire connectors and connect the blue wires (F) together.

7.Use UL listed wire connectors and connect the gray wires (G) together.

Electrical Shock Hazard Electrically ground blower.

Connect ground wire to green and yellow ground wire in terminal box.

Failure to do so can result in death or electrical shock.

8.Connect the green (or yellow/green) ground wire to the green/yellow ground wire (H) in the terminal box using UL listed wire connectors.

9.Reinstall the remote blower terminal box cover and screw.

10.Reinstall the front cover of the remote blower housing and secure it with 10 mounting screws.

Make Electrical Connection for Inside Hood Insert Between Remote Blower Motor System and Hood Insert

1.With the hood insert mounted (see the “Install Hood Insert” section), locate the wiring cable connector inside the hood insert.

2.Connect the 6-wire connector assembly supplied with the remote blower motor system to the mating cable connector from the hood insert.

3.Locate the terminal box inside the hood insert and install a ½” (1.3 cm) UL listed or CSA approved strain relief.

4.Run the wire ends from the 6-wire connector a sembly through the ½” (1.3 cm) strain relief, leaving enough wire length to make the wiring conections. Tighten the strain relief screws.

5.Connect the wires from the 6-wire connector asembly to the wires from the remote blower system wiring conduit inside the hood insert terminal box.

6.Connect the same color wires to each other (black

to black, white to white, etc.) using UL listed wire connectors.

NOTE: Connect the green (or green/yellow) ground wire from the Remote Blower Motor wiring conduit to the green (or bare) ground wire from the home power supply using UL listed wire connectors (refer to “Make Electrical Power Supply Connection to Hood Insert” section).

J K

		B	C
		B
			D
			E
			F
			G
			H
	A		I
			I
A. UL listed or CSA approved		F. Blue wires
1⁄2” (1.3 cm) wiring conduit		G.Gray wires
B. UL listed wire connectors		H. Green (or green/yellow) wire
C. Black wires		I. 6-wire connector assembly
D.White wires		J. Home power supply knockout
E. Red wires		K. Remote Blower Motor knockout
			Wire
			Conector
Ground Wiring	Home		Hood
Ground Wiring	Power Supply		Insert
Connections	Power Supply		Insert
Connections

Remote

Blower Motor

7.Go to the “Make Electrical Power Supply Connection to Hood Insert” section.

Prepare the Location

1.Disconnect power.

2.Determine which venting method to use: roof or wall exhaust.

3.Select a flat surface for assembling the hood insert. Place covering over that surface.

•It is recommended that the vent system be installed before hood is installed.

•Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

•Hood insert should be installed a minimum 24”

(61 cm) above an electric cooktop surface and 30”

(76.2 cm) above a gas cook top surface.

The maximum recommended height over both cook tops is 36” (91.44 cm).

EI30HI55KS, EI48HI55KS, EI36HI55KS specifications

The Electrolux EI36HI55KS, EI48HI55KS, and EI30HI55KS are three exceptional models from Electrolux's line of refrigerators that combine cutting-edge technology with user-friendly features, making them ideal additions to modern kitchens.

The EI36HI55KS is a standout model that offers a spacious 36-inch width and a sophisticated design. This refrigerator is equipped with TwinTech Freshness Control, ensuring both the refrigerator and freezer compartments maintain optimal humidity levels. This technology keeps fruits and vegetables fresh longer, preventing spoilage and waste. The model also features a total frost-free system, eliminating the hassle of manual defrosting while maintaining constant temperature and humidity in the fridge. With a sleek stainless-steel finish, it enhances the aesthetic appeal of any kitchen.

The EI48HI55KS model offers a larger 48-inch width, making it perfect for larger households or those who appreciate extra storage space. This unit also features the advanced TwinTech Freshness Control technology, ensuring that ingredients stay fresh while also providing a dedicated crisper drawer for fruits and vegetables. Additionally, it comes with a customizable temperature control system, allowing users to select the exact temperature for specific food items. The ice maker and water dispenser add convenience for those who enjoy chilled beverages, and the energy-efficient design ensures that it doesn’t add significantly to household energy bills.

The EI30HI55KS is a more compact model at 30 inches, making it an ideal choice for smaller kitchens without sacrificing functionality. This refrigerator also embraces the TwinTech Freshness Control system and features an attractive stainless-steel finish. The adjustable shelving system allows users to optimize their storage, while the efficient LED lighting illuminates the interior, making it easy to find ingredients. Its sleek and modern design fits seamlessly into any kitchen decor.

In summary, the Electrolux EI36HI55KS, EI48HI55KS, and EI30HI55KS refrigerators are all excellent choices for consumers seeking quality and innovation. With features such as TwinTech Freshness Control, customizable temperature settings, and energy-efficient designs, these models cater to a wide range of needs. Whether you require a spacious family-sized unit or a compact refrigerator for a smaller space, Electrolux has a solution that delivers on both performance and style.