List of Materials, Electrical Requirements

List of materials- Electrical & Installation requirements

List of Materials

Parts included in your hood insert

•Metal grease filters:

-Model EI30HI55KS: 2 filters

-Model EI36HI55KS: 3 filters

-Model EI48HI55KS: 4 filters

•Hood insert with 4 halogen lamps installed.

•1 - 10” (25.4 cm) square to 10” (25.4 cm) round duct transition with damper.

•4 - 5 x 45 mm mounting screws for cabinet

•4 - 4.2 x 8 mm screws for 10” round ducting damper

•2 - 18mm spacer screw (only for EI30HI55KS hood insert model)

Parts Needed

•Home power supply cable

•1 - ½” (1.3 cm) UL listed or CSA approved strain relief

•3 - UL listed wire connectors

•1 wall or roof cap

•Metal vent system

•Blower motor system - internal or remote (see “Blower Motor Options” section).

Tools/Materials required

•	Level	•	Caulking gun and
•	Drill		weatherproof caulking
• 1¼” (3 cm) drill bit			compound
•	11/8” (3 mm) drill bit	•	Vent clamps
•	Pencil	•	Jigsaw or keyhole saw
•	Wire stripper or knife	•	Flat-blade screwdriver
•	Tape measure or ruler •		Metal snips
•	Pliers	•	Phillips screwdriver

Blower Motor Options

(1 system is required with Vent Hood Insert)

BLOWER MOTOR SYSTEM KITS		HOOD INSERT MODELS

MODEL	RATING	EI30HI55K5	EI36HI55K5	EI48HI55K5

EI06HIPIKS	3.7 A	•	•	•
(600 cfm Int. Blower Kit)

EI12HIPIKS	7.4 A		•	•
(1200 cfm Int.Blower Kit)

EI06HIPRKS	3.7 A	•	•	•
(600 cfm Remote Blower Kit)

EI12HIPRKS	7.4 A	•	•	•
(1200 cfm Remote Blower Kit)

You can use your range hood model with this blower motor kit.

Electrical Requirements

Observe all governing codes and ordinances. Ensure that the electrical installation is adequate and in conformance with National Electrical Code, ANSI/ NFPA 70 (latest edition), or CSA Standards C22.1- 94, Canadian Electrical Code, Part 1 and C22.2 No.

0-M91 (latest edition) and all local codes and ordi- nances.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

•A 120 volt, 60 Hz., AC only, 15-amp, fused electrical circuit is required.

•If the house has aluminum wiring, follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special co nectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer’s recom- mended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

•Wire sizes and connections must conform with the rating of the appliance as specified on the model/serial rating plate.

The model/serial plate is located behind the filter on the rear wall of the range hood.

•Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70 (la est edition), or CSA Standards C22. 1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91 (latest edition) and all local codes and ordinances.

CAUTION

To reduce the risk of fire and electric shock, install this hood insert only with internal and remote blower models rated maximum 7.4 A (Electrolux™).

EI30HI55KS, EI48HI55KS, EI36HI55KS specifications

The Electrolux EI36HI55KS, EI48HI55KS, and EI30HI55KS are three exceptional models from Electrolux's line of refrigerators that combine cutting-edge technology with user-friendly features, making them ideal additions to modern kitchens.

The EI36HI55KS is a standout model that offers a spacious 36-inch width and a sophisticated design. This refrigerator is equipped with TwinTech Freshness Control, ensuring both the refrigerator and freezer compartments maintain optimal humidity levels. This technology keeps fruits and vegetables fresh longer, preventing spoilage and waste. The model also features a total frost-free system, eliminating the hassle of manual defrosting while maintaining constant temperature and humidity in the fridge. With a sleek stainless-steel finish, it enhances the aesthetic appeal of any kitchen.

The EI48HI55KS model offers a larger 48-inch width, making it perfect for larger households or those who appreciate extra storage space. This unit also features the advanced TwinTech Freshness Control technology, ensuring that ingredients stay fresh while also providing a dedicated crisper drawer for fruits and vegetables. Additionally, it comes with a customizable temperature control system, allowing users to select the exact temperature for specific food items. The ice maker and water dispenser add convenience for those who enjoy chilled beverages, and the energy-efficient design ensures that it doesn’t add significantly to household energy bills.

The EI30HI55KS is a more compact model at 30 inches, making it an ideal choice for smaller kitchens without sacrificing functionality. This refrigerator also embraces the TwinTech Freshness Control system and features an attractive stainless-steel finish. The adjustable shelving system allows users to optimize their storage, while the efficient LED lighting illuminates the interior, making it easy to find ingredients. Its sleek and modern design fits seamlessly into any kitchen decor.

In summary, the Electrolux EI36HI55KS, EI48HI55KS, and EI30HI55KS refrigerators are all excellent choices for consumers seeking quality and innovation. With features such as TwinTech Freshness Control, customizable temperature settings, and energy-efficient designs, these models cater to a wide range of needs. Whether you require a spacious family-sized unit or a compact refrigerator for a smaller space, Electrolux has a solution that delivers on both performance and style.