Select and start a washing programme
Select the washing programme
with the door slightly opened. The start of the programme will occur only after the closure of the door. Until then it is possible to modify the settings.
1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate
2.Check that the water tap is opened
3.Press the On/Off button. The dishwasher must be in setting mode. The end of programme indicator light is flashing.
4.Press the programme
selection/cancel button until the
light corresponding to the required washing programme illuminates (see "Washing programmes" chart).
Close the dishwasher’s door, the programme starts automatically.
daily use electrolux 25
Interrupt or cancel a washing
programme in progress ONLY if it’s absolutely necessary.
Attention! Hot steam may escape when the door is opened. Open the door carefully.
Interrupt a washing programme in progress:
●Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.
Cancel a washing programme in progress
●Open the dishwasher door; press the programme selection/cancel
button for about 3 seconds, until the light of the running programme turns off and the end of
programme indicator light flashes. The washing programme has been cancelled and the appliance is now in setting mode.
●If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.