Malfunction
The programme does not start
something not working | electrolux 31 |
Possible cause and solution
●The dishwasher’s door has not been properly closed.
Close the door.
●The main plug is not plugged in. Insert the main plug.
●The fuse has blown out in the household fuse box.
Replace the fuse.
Once these checks have been carried out; switch on the appliance, press the programme selection/cancel
button and close the door.
The programme will continue from the point at which it was interrupted.
If the malfunction or fault code reappears contact the Service Force Centre.
For other fault codes not described in the above chart, please contact your Service Force Centre.
Contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).
This information can be found on the rating plate located on the side of the dishwasher door.
So that you always have these numbers at hand, we recommend you to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . . . . . . .
PNC :. . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . .