Filling with Special Salt for the Water Softener
1Use only special salt for dishwashers. Never fill the salt container with any another type of salt (e.g. culinary salt) or dishwasher deter- gent. This would irreparably damage the water softener.
Prior to filling with salt, please check each time that you really do have a packet of spe- cial salt in your hand.
Fill with special salt:
•Prior to using the dishwasher for the first time
•When the SALT indicator t on the control panel is illuminated.
3If the water hardness in your area is less than 4 °d, you do not need to use special salt.
1.Open the door, remove the lower basket.
2.Undo the lid on the salt container by turning it anti- clockwise.
3.Only when using for the first time: fill the salt container with water.
4.Place the funnel supplied on the container open- ing.
Fill the container with special salt through the fun- nel; the capacity of the container is approx. 1.0- 1.5 kg depending on the grain size. Do not overfill the salt container with special salt.
3The water expelled by filling the salt con- tainer with special salt runs out of the salt container onto the base of the washing com- partment. This is not a cause for concern, the water will be pumped out at the start of the next wash programme.
5.Clean any salt remnants on the container open- ing.
6.Turn the lid clockwise to the stop, otherwise spe- cial salt will leak into the wash water, this could lead to poor wash results. To avoid this run a rinse programme after filling the salt container with spe- cial salt. This will wash away salt water and any salt crystals that have been spilt.
3Depending on the size of the salt grains, it can take several hours for the salt to dissolve
in the water and the special salt indicator tto extinguish.
The setting of the water softener and thus the consumption of salt are dependent on the hardness of the local water.
SALE |
SALT |
SALZ |
SEL |
11