Built-In Dishwasher
(see enclosed installation instructions)
Free-Standing Appliances
1can be set up as
If the dishwasher is set up next to a cooker, a
If the dishwasher is installed underneath a kitchen work surface, the original work surface of the dish- washer is to be removed as follows:
1.Unscrew the screws from the positioning plates on the back (1).
2.Slide the appliance's work surface approx. 1 cm to the rear (2).
3.Lift the work surface at the front (3) and remove.
1If the dishwasher is later used as a free- standing appliance, the original work surface must be
3The plinth on
28