14electrolux
The cleaning results are not satisfactory
Dry water drop signs on glasses and dishes
•Increase rinse aid dosage.
•The detergent can be the cause.
Installation
Warning! Make sure that mains plug is disconnected from the mains socket during installation.
Fitting the appliance
Put the appliance adjacent to a water tap and a drain.
When you put the appliance in place, make sure that the water hoses are not kinked or squashed.
Install the appliance on a kitchen sink, work- top or
Positioning
Install the dishwasher into the furniture of the kitchen.
Make sure that the dimensions of the recess agree with the given dimensions.
Make sure that there are openings in the fur- niture for the inlet hose, the water drain hose and the mains cable.
Adjusting the level of the appliance
Make sure that the appliance is level to close and seal the door correctly. If the level of the appliance is correct, the door does not catch on the sides of the cabinet. If the door does not close correctly, loosen or tighten the ad- justable feet until the appliance is level.
Water connection
Inlet hose
The appliance has safety features to prevent that the water in the appliance goes back into the drinking water system.
Connected the appliance to a hot (max. 60°) or cold water supply.
If the hot water comes from alternative sour- ces of energy that are more environmentally friendly (e.g. solar or photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption.
It is important that a water tap or stopcock is near the dishwasher with easy access.