It is normal that water overflows from the salt container when you fill it with salt
electrolux 7
When you set the water softener to level 1, the salt indicator light does not stay on.
Use of rinse aid
Caution! Only use branded rinse aid for dishwashers.
Do not fill the rinse aid dispenser with other products (e.g. dishwasher clean- ing agent, liquid detergent). There is a risk of damage to the appliance.
Rinse aid makes it possible to dry the dishes without streaks and stains. Rinse aid is automatically added during the last rinsing phase.
Do these steps to fill the rinse aid dispenser:
1.Press the release button (A) to open the rinse aid dispenser.
2.Fill the rinse aid dispenser with rinse aid. The mark 'max.' shows the maximum level .
3.Remove the spilled rinse aid with an ab- sorbent cloth to prevent too much foam during the subsequent washing pro- gramme.
4.Close the rinse aid dispenser.
The capacity of the rinse aid dispenser is approximately 150 ml. The quantity of rinse aid is sufficient for approximately 60 washing programmes.
Adjust the dosage of rinse aid
The appliance is set at the factory at level 1. You can set the rinse aid dosage between 1 - 6 (1- 6 ml of the rinse aid).
Refer to the washing results (chapter 'What to do if...'). Start with the lowest dosage.
1.Turn the arrow clockwise to increase the dosage.
2.Increase the dosage if there are water droplets or limescale on the dishes.
Loading cutlery and dishes
Helpful hints and tips
Caution! Only use the appliance for household utensils that are applicable for dishwashers.
Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.).
•Before you load cutlery and dishes, do these steps:
–Remove all food remainings and debris.
–Make burnt, remaining food in pans soft.