10electrolux
Programme
Degree
of soil
Normal or light soil
Type of
load
Crockery and cut- lery
Programme description
Main wash up to 50°C 1 intermediate rinse Final rinse
Energy
Save op-
tion1)
Selectable, no impact on washing pro- gramme.
1)For programmes where the option has an impact, the energy saving is between 10% and 25%.
2)During the 'Auto' washing programme the level of soiling on the dishes is determined by how cloudy the water is. The programme duration, water and energy consumption levels can vary; this depends upon if the appliance is fully or partially loaded and if the dishes are lightly or heavily soiled. The temperature of the water is automatically adjusted between 45°C and 70°C.
3)Test programme for test institutes. Please refer to separate leaflet supplied, for test data.
Consumption values
Programme |
| Programme duration |
| Energy consumption |
| Water consumption |
|
| (in minutes) |
| (in kWh) |
| (in litres) |
|
| 1) |
|
| ||
|
|
|
|
|
|
|
|
| - |
| 1,0 |
| 9,0 |
|
| - |
|
| ||
|
| - |
| 0,63 |
| 7,0 |
|
| - |
| 0,45 |
| 6,0 |
|
|
|
|
|
|
|
1) The digital display shows the programme duration.
The pressure and temperature of the water, the variations of power supply
and the quantity of dishes can change these values.
Setting and starting a washing programme
Set the washing programme with the door ajar. The washing programme only starts after you close the door. Until then it is possible to modify the settings.
Do these steps to set and start a washing programme:
1.Switch on the appliance.
2.Make sure that the appliance is in setting mode.
3.Press one of the programme buttons. Refer to the chapter 'Washing pro- grammes'.
–The programme indicator light comes on.
–All other programme indicator lights go off.
–The digital display shows in flashing the programme duration.
–The phase indicator light for the wash- ing programme starts to flash.
4.Close the door.
–The washing programme starts auto- matically.
–The phase indicator light for the wash- ing programme is on.
When the washing programme oper- ates, you cannot change the pro- gramme. Cancel the washing pro- gramme.
Warning! Only interrupt or cancel a washing programme if necessary.
Caution! Open the door carefully. Hot steam can come free.
Cancelling a washing programme
1.Press and hold function buttons B and C until all the programme lights come on.
2.Release function buttons B and C to can- cel the washing programme.
At this time you can do these steps:
1.Switch off the appliance.
2.Set a new washing programme .